TACO Marine V21-0460 Rigid Vinyl Rub Rail, 1 in x 3/8 in, Black, 12 ft

Overview

The TACO Marine V21-0460BKA12D is a black rigid vinyl rub rail for boats that need a narrow 1 inch by 3/8 inch protective profile along the hull-to-deck joint or edge trim. It comes in a 12 foot length and uses a no-insert profile, giving the rail a simple finished look without a separate flexible insert strip.

This rub rail is drilled and countersunk for #6 screws on 6 inch centers, which helps keep installation spacing consistent during replacement work or new fitting. The rigid vinyl profile cuts and drills with standard woodworking tools, and heat is required when forming it around radiused sections of the hull.

Key features

• 1 inch by 3/8 inch rigid vinyl rub rail profile for narrow hull edge protection and trim work.
• Black no-insert style gives the boat edge a clean finish without a separate insert strip.
• 12 foot length works well for replacement sections, repairs, or smaller rub rail runs.
• Pre-drilled and countersunk for #6 screws on 6 inch centers to support even fastening.
• Cuts and drills with standard woodworking tools, which helps during fitting and trimming on board.
• Requires heat for radius forming, an important detail when working around curved hull sections.
• Made in the USA and backed by a 5-year limited warranty.

Installation and fit

This rail is a practical choice for boat owners, yards, and refit crews replacing a slim black rub rail or adding edge protection where a compact profile is needed. Before ordering, compare the 1 inch by 3/8 inch profile, 12 foot length, screw size, and screw spacing against the existing rail or the mounting surface on the boat.

Because this is a rigid vinyl part, straight runs are straightforward, while corners and curved sections need controlled heat to form the rail without forcing it. Dry fitting the rail first helps confirm cut points, fastener alignment, and how the profile sits against the hull or deck edge before final fastening.

Use on board

The no-insert construction keeps the profile simple and easy to maintain, with fewer separate trim pieces to align during installation. It suits applications where the main goal is a neat black edge, light impact protection, and a rub rail profile that can be drilled, cut, and fitted during common marine repair work.