Overview

The Garmin 010-12525-01 is a neoprene flotation lanyard that keeps a compatible inReach or handheld GPS attached to you and helps it stay afloat if it goes overboard. A quick-release connector lets you detach the device without undoing your tether point. The high-visibility orange float is easy to spot when it is bobbing alongside the boat.

This is a practical add-on for kayak and dinghy runs, fishing from the rail, or any time your handheld lives on a PFD or foul-weather jacket. It adds little bulk at about 45 g (1.6 oz) and keeps the unit close enough to grab with one hand.

Key features

• Neoprene float helps keep compatible satellite communicators and handheld GPS units afloat
• Quick-release connector for fast detachment when you need the device in-hand
• High-visibility orange makes it easier to find on deck or in the water
• Attaches to devices that have a clip, carabiner, D-ring, or similar lanyard point
• Approximate weight: 45 g (1.6 oz)

What's included

• Flotation lanyard

Compatibility and fit

It is commonly used with Garmin inReach handhelds such as inReach Mini and inReach Explorer+ and SE+, along with many Garmin handheld GPS families including GPSMAP, eTrex, Oregon, and Montana. Fit depends on your device having a secure attachment point for the connector.

Some older handhelds do not fit this lanyard system, including eTrex Legend, eTrex Vista, eTrex Summit, and the GPSMAP 60 series. The Montana 700 series is also not supported.

On-board setup

Connect the lanyard to the device attachment point, then secure the other end to your PFD, belt loop, or a short tether inside a deck bag so it cannot slip out if you capsize. Use the quick-release when handing the device to a crewmate or when you need it free for clear sky view.

Care after saltwater use

After salt spray or a dunk, rinse with fresh water and let it dry fully before stowing. Check the connector for grit and make sure the attachment point on your device is not worn or cracked.