Overview

The Garmin 010-10380-00 is a replacement belt clip for carrying compatible Garmin handheld units and remotes on your clothing or gear while you are on the dock or moving around the boat.

It fits a range of Garmin devices, including Astro, eTrex Series, Geko Series, GPS 60 and GPSMAP Series handhelds, Rino Series, and the GHC 10 remote used with GHP 10 and GHP 10V autopilot systems. Keeping the unit clipped on makes it easier to grab at the helm, in a cockpit, or while walking the deck without setting it down where it can slide or get knocked overboard.

This is a carry accessory with no wiring, so it does not affect your 12 V or 24 V electrical system, marine networks, or electronics mounting. Fit depends on the case style and clip interface on the device itself, so it is important to match the device family before ordering.

Key features

• Replacement clip for Garmin Astro, eTrex Series, Geko Series, GPS 60, GPSMAP Series, and Rino Series devices, plus the GHC 10 remote for GHP 10 and GHP 10V autopilots
• Keeps a handheld GPS or remote on a belt, waistband, PFD strap, or pack strap so it stays within reach when you are moving around the cockpit
• Helps reduce drops when you are working one-handed, climbing to the foredeck, or passing gear between crew
• No power or data connections; it is strictly a carry clip and does not tie into onboard wiring or networked systems

Installation and setup

Replace the existing clip on the device and confirm the latch fully engages before using it underway. In an open cockpit or rough conditions, pairing a handheld with a lanyard or tether is a sensible backup even when the clip is secure.

Compatibility and fit

This clip is intended for devices that use the belt-clip attachment found across Astro units, many eTrex and GPSMAP handhelds, the GPS 60 family, Geko units, Rino radios, and the GHC 10 remote. Because some product families include different case styles, check your exact model and the back-side clip interface to avoid ordering a clip that will not lock in properly.

Use cases on board

This is a practical add-on for boaters who keep a handheld GPS as a backup navigator, use a handheld for dinghy runs, or carry a GHC 10 remote while docking and anchoring. It also suits crews who want the device accessible while moving between the helm, cockpit, and cabin.

Maintenance and care

After exposure to salt spray, rinse the clip with fresh water and let it dry before storing. Periodically clear sand or dried salt from the latch area so it continues to snap in cleanly.