Overview

The B&G 000-13722-001 is a protective suncover made to fit B&G Triton² instrument displays. It keeps the face of the display covered when the boat is tied up, in storage, or getting rinsed down after a day on the water.

On a helm or mast-mounted instrument, the screen is exposed to constant sunlight and salt residue. This cover helps reduce glare-related wear, keeps salt spray off the lens, and limits scuffs from lines, gear, and everyday cockpit traffic.

Key features

• Made specifically for B&G Triton² displays for a secure, correctly shaped fit
• Covers the display face to help block sun exposure and salt spray buildup while moored or stored
• Simple on and off handling for regular use at the dock and during layups
• Helps prevent scratches and grime when the cockpit is being cleaned or gear is moved around
• Useful as a replacement cover when the original has been lost or damaged

Compatibility and fit

This suncover is intended for Triton² instrument displays. Fit is model-specific, so it is not meant as a universal cover for other B&G displays or chartplotters.

Installation and everyday use

Use the cover any time the display is not actively being viewed, such as when the boat is on a mooring, in a slip, or under a cover. Remove it before operating the instrument so the screen and keys remain fully visible and accessible.

After washdowns or rough weather, let the display face dry before reinstalling the cover to avoid trapping moisture against the lens.

Maintenance and care

Rinse the cover with fresh water if it gets salt on it, then let it dry before putting it back on or stowing it. Avoid harsh solvents that can dull the surface over time.

Use cases on board

This is a practical add-on for sailboats and powerboats that keep Triton² instruments exposed in the cockpit, at the nav station, or on the mast. It is especially helpful for boats that live outdoors, see frequent salt spray, or spend long stretches in direct sun between trips.