Overview

The Attwood Marine 11959-1 is a kayak grapnel anchor kit for kayaks, PWCs, canoes, and float tubes when you need to hold position for fishing, casting, or taking a short stop on the water. It includes a 3 lb. silver grapnel anchor, 20 feet of 1/4 inch black diamond braided MFP anchor rope, and a mesh bag with a drawstring.

The grapnel pattern works across mud, sand, gravel, and rock, which covers the bottom conditions many paddlers and small-craft users run into through a normal season. This is a compact anchor setup that keeps the main pieces together in one bag, so it is easier to stow between trips and quicker to put to use once you reach your spot.

Key features

• 3 lb. grapnel anchor sized for kayaks, PWCs, canoes, and float tubes
• Works in mud, sand, gravel, and rock
• Includes 20 feet of 1/4 inch black diamond braided MFP anchor rope
• Mesh storage bag with drawstring keeps the kit contained and easier to carry
• Single-kit setup that covers the anchor, line, and storage bag without piecing a system together separately

Installation and use

This kit suits controlled stops in protected water where a small craft needs to stay put for a while rather than drift. Lower the anchor instead of throwing it, then let the line out and apply light tension so the grapnel can catch the bottom cleanly.

For buyers comparing anchor kits, the main fit points here are the 3 lb. anchor weight and the included 20 foot line. That makes it a practical match for paddle craft and other light personal watercraft, rather than larger boats that need more rode and a heavier anchor setup.

What's included

• 3 lb. silver grapnel anchor
• 20 feet of 1/4 inch black diamond braided MFP anchor rope
• Mesh bag with drawstring

Maintenance and care

After use, rinse the anchor, rope, and bag with fresh water, especially after saltwater trips, and let the kit dry before stowing it away. It also helps to check the rope for abrasion and rinse out sand or grit from the bag so the kit stays ready for the next launch.