Overview

The Attwood Marine 11952-7 is a pair of zig-zag fender hangers that lets you hang and reposition fenders without tying knots in the fender line. Each set includes two 4-foot fender lines, so it is ready for a straightforward rail setup as soon as it is on board.

The line is looped over the rail and then woven through the zig-zag teeth to hold the fender at the height you need. This works well for routine docking when you want to move a fender up or down quickly as dock height, piling height, or hull contact points change.

Key features

• Pair of zig-zag fender hangers for setting fender height at the rail
• Includes two 4-foot fender lines for a ready-to-rig package
• Zig-zag teeth hold the line in place without tying and retying knots
• Fender position can be reset quickly when moving between docks or coming alongside another boat

Compatibility and fit

This hanger style suits boats where the fender line can be passed over a rail or similar attachment point before it is locked into the hanger. The included 4-foot lines work for many common setups, but fit still depends on rail height, freeboard, and the size and position of the fender you are using.

It is a practical match for runabouts, fishing boats, pontoons, and cruising boats that need a simple way to set fender height at the rail without keeping extra knots in the line.

Installation and use

Setup is simple: loop the line over the rail, weave it through the zig-zag slots, and set the fender where you want it to sit against the hull. That makes it easier to adjust for a floating dock, a fixed pier, or rafting alongside another boat.

A quick fit check before docking helps confirm that the 4-foot line length gives you enough drop from the rail to the working fender position on your hull.

What's included

• Two zig-zag fender hangers
• Two 4-foot fender lines