Jabsco Quiet Flush E2 Toilet Service Kit, For 38045 & 38245 Series

Overview

The Jabsco 38595-1000 is a service kit for Jabsco Quiet Flush E2 marine toilets. It is made for the 38045 and 38245 Series Quiet Flush E2 toilets and gathers the small sealing and wear parts commonly needed when servicing the toilet base, waste pump area, shaft seal, and related components.

This kit is useful for planned maintenance or repair work in a boat head where a leaking seal, worn joker valve, or disturbed pump housing seal needs to be addressed without sourcing each small part separately. It suits owners, yards, and service technicians maintaining Quiet Flush E2 installations on cruising boats, fishing boats, and other vessels with electric marine sanitation systems.

Key features

• Service kit for Jabsco Quiet Flush E2 marine toilets in the 38045 and 38245 Series.
• Includes the joker valve and multiple seals that support waste pump service and help control backflow in the discharge path.
• Covers several keyed service items from the Quiet Flush E2 assembly, which helps keep maintenance work organized during disassembly and reassembly.
• Useful for routine sanitation system upkeep before longer trips, seasonal commissioning, or troubleshooting leaks around the pump and seal areas.
• Compact parts kit that can be kept on board as a practical spare for boats with a compatible Quiet Flush E2 toilet.

Compatibility and fit

This kit is intended for the Jabsco 38045 and 38245 Series Quiet Flush E2 toilets. Before ordering, match the toilet series on the existing installation and compare the service part keys with the toilet parts diagram, especially if the head has been modified or repaired previously.

Installation and service notes

Service work on a marine toilet should be done with the toilet isolated from power and with the water supply and discharge system secured as appropriate for the vessel. The parts in this kit are small, so keeping the old components laid out in order during removal makes it easier to confirm each replacement during reassembly.

For best results, inspect nearby hoses, clamps, discharge fittings, and wiring while the base or pump area is open. Replacing seals solves only the service points covered by the kit, so any cracked hose, loose clamp, blocked discharge line, or damaged housing should be handled separately.

What’s included

• Base cover screw, key 9a.
• Waste pump housing o-rings, keys 13 and 14a.
• Joker valve, key 15.
• Motor adaptor o-ring, key 19.
• Washer seals, key 22.
• Shaft seal, key 25.
• Slinger, key 26.