Lumitec Contour Surface-Mount Stern Nav Light, 10-30VDC, USCG 2nm

Overview

The Lumitec 101598 is a surface-mount stern navigation light with white output and a white finish for transom installations on 12V or 24V boats. It runs on 10-30 VDC and is U.S. Coast Guard approved for 2 NM visibility.

This light is meant for retrofit and new installs where you do not have (or do not want to cut) an inset pocket. The housing sits low at 1 in tall, with an overall size of 4.5 in wide by 2.1 in deep, and it draws 18 mA at 12V or 12 mA at 24V (rated 1.5 W).

Key features

• Surface-mount composite stern light for installs where a recessed pocket is not practical
• White output with U.S. Coast Guard approval for 2 NM visibility
• 10-30 VDC input for 12V and 24V electrical systems
• Low current draw: 18 mA at 12V, 12 mA at 24V (rated 1.5 W)
• Compact profile for transom mounting: 4.5 in wide x 2.1 in deep x 1 in tall
• Operating temperature range from -31 F (-35 C) to 131 F (55 C)
• White finish for a clean look on light-colored gelcoat and painted surfaces

Installation and setup

Mount it on a horizontal surface at the stern where the light can be seen clearly and is not blocked by outboards, dinghy hardware, ladders, or deck gear. On a transom install, plan wire routing so the cable is protected from chafe and stays supported so it does not flex at the entry point when the boat is moving.

As with any through-fastener on the exterior of a boat, seal the fastener holes and cable pass-through appropriately for your mounting surface to help keep water out of the core and wiring runs.

Electrical and system integration

This is a straightforward on and off navigation light. Wire it into your vessel lighting circuit and switch panel, using connections suited for the bilge and transom environment. The 10-30 VDC input range makes it a direct fit for most 12V and 24V DC systems without a separate driver box.

If you are replacing an older stern light, confirm the circuit protection and wiring condition while you have the old fixture off. The low current draw can be a nice upgrade for boats that spend long evenings at anchor running nav lights.

Compatibility and fit

Check clearance at the mounting location before drilling, and measure against the housing size (4.5 in wide x 2.1 in deep x 1 in tall) so it lands cleanly on the surface and does not interfere with trim tabs, tie-down points, or transom doors. This model is intended for stern navigation lighting applications; confirm your vessel requirements and placement so your overall navigation light setup remains compliant for your boat and operating area.

Use on board

This light is a good match for owners refitting older surface-mounted stern lights, or for new builds where the transom design does not allow a molded pocket. It also suits boats that see regular salt spray and washdowns, where a sealed, low-profile fixture helps keep the stern tidy and easier to clean.

Maintenance and care

Rinse the exterior after saltwater use and check the mounting screws and sealant line during routine washdowns. If your stern area sees a lot of fishing gear contact, take a quick look now and then to make sure the lens face stays clear of nicks and heavy scuffing that can reduce light output.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.