Garmin SS60 Thru-Hull Transducer, 600W, 50/200kHz, 8-Pin, Stainless Steel, Depth/Temp Sensor

Overview

The Garmin SS60 is a thru-hull transducer rated at 600 W that runs at 50/200 kHz and connects via an 8-pin plug.

It is intended for fiberglass and wood hulls and uses a tilted element so the sonar beam stays closer to vertical without needing a fairing. It is listed with a depth range of 800 to 1,200 ft and beamwidths of 45 degrees at 50 kHz and 12 degrees at 200 kHz.

This is a good match for boaters who want traditional dual-frequency sonar for cruising and fishing and prefer a clean thru-hull install over a transom mount.

Key features

• 600 W traditional sonar transducer with dual-frequency 50/200 kHz operation.
• Listed depth range of 800 to 1,200 ft for bottom tracking and fishfinding in a wide range of conditions.
• Beamwidths listed at 45 degrees (50 kHz) and 12 degrees (200 kHz) for broad coverage and tighter target focus.
• Tilted element style helps keep the beam closer to vertical without a fairing.
• Thru-hull mounting format for a clean, permanent installation.
• Intended for fiberglass and wood hull construction.
• 8-pin connection for compatible Garmin sonar and fishfinder systems.

Variants

The SS60 is offered in multiple tilt angles to match different hull deadrise at the mounting location.

The tilt angle changes the internal element orientation so the beam points more vertically after installation. Match the tilt to the hull angle where the transducer will sit.

• 010-11868-20: Tilt 0 degree. Works for mounting areas with little deadrise where the unit sits close to level.
• 010-11868-21: Tilt 12 degree. A common mid-range option when the hull has noticeable deadrise at the install point.
• 010-11868-22: Tilt 20 degree. Suits steeper deadrise locations where extra compensation helps keep the beam centered.

Compatibility and fit

Confirm your display or sonar module supports a 600 W 50/200 kHz transducer and accepts an 8-pin transducer connection before ordering. Hull material matters here as well, since this model is intended for fiberglass and wood hulls.

Installation and setup

A thru-hull install involves drilling the hull and sealing the housing correctly. Plan for inside access to tighten the retaining nut, route the cable to the helm or sonar module, and bed the fitting so it stays watertight through bilge moisture, vibration, and regular washdowns.

For clean readings at speed, place the transducer where water flow stays smooth, away from strakes, steps, intakes, and other fittings that can introduce turbulence or aeration.

On-board use notes

50 kHz is typically used for broader coverage and deeper water, while 200 kHz narrows the beam for better target separation in shallower depths. Actual performance is influenced by hull shape, installation quality, electrical noise on board, and sea conditions.

After saltwater use, rinse the exposed face and check the thru-hull seal during routine inspections and haul-outs.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.