Lopolight Series 201-011 LED Masthead Light, 3NM, Vertical Mount, 10-32VDC, IP68, 15m Cable

Overview

The Lopolight 201-011-15M is a white masthead navigation light with a 225° sector and 3 NM visibility, supplied for vertical mounting with a 15 m cable. It runs on 10-32V DC and draws 3 W (232 mA at 12VDC, 127 mA at 24VDC), so it works on standard 12V and 24V onboard systems.

The housing measures 74.55 x 28 x 73.16 mm (2.9 x 1.1 x 2.88 in) and is sealed to an IP68 rating for exposed mounting locations. It is rated for vessels 12-20 m and approved to COLREG72, EN14744, IEC 60945, IACS E10, and USCG.

Key features

• 3 NM white masthead light with a 225° sector and >15 cd intensity
• 10-32V DC input for 12V or 24V systems
• 3 W draw (232 mA @ 12VDC, 127 mA @ 24VDC)
• IP68 rating for spray, rain, and washdowns at the masthead
• Silver anodized aluminum (25 µ) body with a PMMA lens and A4 stainless mounting screws
• Vertical mount format with a 15 m cable for long runs down a mast or through a hardtop
• Operating temperature range of -25°C to 55°C

What's included

• Navigation light with 15 m cable
• 2 mounting screws (M6 x 8 mm)
• Installation guide

Compatibility and fit

This is a masthead (steaming) light that needs a clear forward-facing 225° arc. Install it on the vessel centerline and keep antennas, wind instruments, and rigging out of the light sector so the beam is not shadowed.

Installation and setup

Mount vertically using the supplied M6 fasteners on a flat surface. Route the cable with strain relief at the light and a drip loop before the cable enters the mast or cabin, then protect the run at mast exits and deck glands to avoid chafe from vibration.

Electrical and system integration

Wire it into a 10-32V DC navigation-light circuit controlled by your switch panel or lighting controller. The recommended minimum feed wire size is 0.5 mm² (AWG 22), and the circuit should be protected with an appropriately sized fuse or breaker for the load and the cable run.

Materials and sealing

The body uses silver anodized aluminum with a PMMA lens and A4 stainless hardware to suit saltwater exposure. The IP68 seal and operating range from -25°C to 55°C help it stay stable through cold starts, hot sun, and regular washdowns.

Use on board

This light fits powerboats and motorsailers in the 12-20 m range that need a certified 3 NM masthead light, especially when the wiring run from the masthead to the distribution point is long. It also suits refits where the existing cable chase is tight and a pre-attached 15 m lead simplifies routing.

Maintenance and care

Rinse salt off the lens and housing during routine washdowns and keep the lens clear of dried salt film. At least once a season, inspect the cable where it passes through glands and mast exits, and re-seal any penetrations if you see moisture tracking.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.