i2Systems Profile P1120 Tri-Light Surface-Mount LED Downlight, 9-30V DC, IP67, 3.48in Round, 0.72in Deep, 2-Wire Color Switching

Overview

The i2Systems Profile Tri-Light is a round, surface-mount downlight that cycles between three LED colors using a simple 2-wire connection. It runs on 9-30V DC for 12V and 24V systems and draws 1.5W (about 125mA at 12V).

It is rated IP67 for spray and washdowns, with a stainless steel housing that suits cockpits, hardtops, arches, and other exposed mounting locations. It is not intended for submersible use or areas where standing water can collect over the fixture.

The light has a 3.48 in (88 mm) face with a low 0.72 in (18 mm) profile, and a 120° full-angle beam that spreads light evenly through the diffused lens.

Key features

• Three-color output in one fixture; color changes by quickly toggling power off and back on
• 9-30V DC input for 12V or 24V systems; 1.5W draw (125mA at 12V, 63mA at 24V)
• IP67-rated for spray and washdowns; intended for exterior applications but not submersible
• Round surface-mount footprint: 3.48 in (88 mm) face, 0.72 in (18 mm) depth
• 120° full-angle beam for wide spread lighting through a diffused lens
• Stainless steel housing with multiple trim finish options to match onboard hardware
• Built-in protection includes surge suppression, reverse polarity protection, and an auto-reset fuse
• 18 in twisted 18 AWG leads for straightforward tie-in to an existing lighting circuit

Variants

The Profile Tri-Light is offered with two color sets: Red/Cool White/Blue or Red/Warm White/Blue. Cool white has a crisper look for task lighting, while warm white leans softer for cabin and lounge areas.

Trim finish varies by part number: Chrome, White, Brushed Nickel, and Off -White. Electrical input, mounting size, and the 2-wire color-cycling behavior stay consistent across the P1120Z Profile Tri-Light range.

Installation and setup

This is a surface-mount light that fastens with three screws and needs a wire clearance hole behind the fixture. Plan for 0.72 in (18 mm) depth plus room for the wire bend and any connectors inside the mounting surface.

Connect the red lead to a fused 9-30V DC positive feed and the black lead to DC negative. To cycle colors, switch the circuit off and back on in under a second; if multiple fixtures fall out of sync, leave power off for a few seconds, then reapply power so they restart together.

Compatibility and fit

Use it where a wide-beam, low-profile downlight makes sense on board, including hardtops, cockpit overheads, arches, helm areas, companionways, and cabin accents. The IP67 seal handles wet conditions, but avoid mounting where the light can sit in standing water or be hit by high-pressure water streams.

This light is a good match for boaters who want a red night option plus a white channel for working on deck, with a blue setting for dockside atmosphere, without adding extra conductors or separate fixtures.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.