Vimar E14 Lampholder, M10x1 Nipple, Locking Screw, Brass Finish

Overview

The Vimar VM02147 is an E14 Edison lampholder for portable installations and compact light fixtures where you need a threaded entry and a clean, finished look. It uses an M10 x 1 threaded fitting with a locking screw and measures about 2.8 x 5.7 x 2.8 cm, which helps when you are working inside tight housings on board.

The metal body uses a brass-colour finish with a zinc-plated polished steel dome and a threaded skirt, so it suits visible cabin areas like reading lights and small pendants while still holding up to everyday vibration and handling.

Key features

• E14 lampholder (small Edison screw) for E14-base bulbs commonly used in compact marine fixtures
• M10 x 1 threaded fitting with locking screw to keep the assembly from loosening under vibration
• Zinc-plated polished steel dome with threaded skirt for a neat mechanical finish during assembly
• Steel construction with a brass-colour finish for a classic look in cabins and covered interior spaces
• Compact size (about 2.8 x 5.7 x 2.8 cm) for tight lamp bodies and small shades
• Marked for CE and ENEC 11

Compatibility and fit

This lampholder is for E14 bulbs only. E14 bulbs are found in many European-style fixtures, including both shore-power AC lights and low-voltage onboard lights that use E14-base bulbs, so confirm the bulb type and voltage match your specific fixture and power system before installing.

The M10 x 1 threaded fitting is meant for mounting through a lamp body or bracket that accepts that thread size. If you are replacing an existing holder, check the thread standard on the old part and the available clearance for the dome and skirt.

Installation and setup

Install with power fully isolated and wire it using marine-appropriate practices for your system. On a boat, a solid mechanical mount and proper cable support matter as much as the electrical connection, so provide strain relief and keep the wiring protected from chafe and heat inside the fixture.

After assembly, use the locking screw to help the threaded connection stay tight over time, especially on planing hulls or anywhere the light sees frequent vibration.

Use on board

This style of lampholder is a good match for replacing worn holders in cabin reading lights, chart table lamps, berth lights, and small pendants where an E14 bulb is used and the fixture mounts through a threaded entry.

Maintenance and care

Periodically check for loosening and for any surface corrosion if the fixture lives in a damp area. If the installation is near salt spray, keeping the holder inside a protected light body and maintaining good seals around the fixture will help extend service life.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.