Simrad Dash Mount Kit, Flush Mount, For NSS7 EVO3 and B&G Zeus3-7

Overview

The Simrad 000-13753-001 is a dash mount kit for fitting an NSS7 evo3 or B&G Zeus3-7 display into a helm panel with a flush finish in the dash. The 7-inch chassis uses a panel cutout of 239 x 154 mm (9.41 x 6.05 in), so it is a practical match for new console work and refits where you want the display sitting cleanly in the dash.

Flush mounting keeps the screen close to the console and avoids bracket hardware sticking out where it can get bumped by knees, rods, or companionway traffic. Plan room behind the panel for the power, network, and sonar connectors, and route cables so they are not under constant bend or strain.

During installation, the display uses a self-adhesive foam gasket on the back of the unit to seat against the dash and help reduce vibration. Tighten the mounting points evenly so the bezel sits flat without twisting the display frame.

Key features

• Made for the 7-inch NSS7 evo3 and Zeus3-7 chassis and its in-dash mounting pattern
• Supports a flush helm install that keeps the display face tight to the console
• Panel cutout reference for the 7-inch chassis outline: 239 x 154 mm (9.41 x 6.05 in)
• Useful for new builds and refits where you want to move from a bracket mount to an in-dash mount
• Works with the display's foam gasket to keep the unit seated evenly against the dash and cut down on buzz in a vibrating console

Compatibility and fit

This dash mount kit matches the NSS7 evo3 and Zeus3-7 7-inch display footprint. Other screen sizes in the NSS evo3 and Zeus3 range use different dash mount kits, so confirm the display size before cutting the dash.

Installation and setup

Measure twice, then cut: lay out the opening, dry fit the display, and check that the dash thickness and reinforcement allow the unit to clamp down evenly. If the console core is exposed after cutting, sealing the raw edge helps prevent moisture from wicking into plywood or cored panels.

Leave enough slack for service loops and add chafe protection anywhere wiring passes through fiberglass or metal. A small drip loop on cables below the display helps keep water from tracking straight into the back of the unit.

Use cases on board

This setup is a good match for center consoles, pilothouses, and sailboat pedestals where you want a helm that stays clear and a display that stays put in chop. It also helps when the mounting surface is tight and you want to keep walkways and handholds unobstructed.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.