Vimar Eikon EXE Cover Plate, 7-Module, 212 x 90 mm

Overview

The Vimar Eikon EXÉ 22657 is a 7-module cover plate that finishes a Vimar Eikon modular switch or socket group with a faceplate that sits flush and keeps the lines tidy on the bulkhead. It spans 212 mm by 90 mm and can be mounted horizontally or vertically, so it works for wide or stacked layouts depending on your frame.

This is the outer plate only, with clamp mounting to the underlying 7-module support frame. It carries an IP00 rating, so it belongs in interior locations that stay dry and protected rather than anywhere that sees washdowns, spray, or persistent condensation.

Key features

• 7-module (7M) cover plate for the Vimar Eikon module system
• Overall size: 212 mm (W) x 90 mm (H), with horizontal or vertical mounting
• Clamp-mounted fastening to the matching 7-module support frame
• IP00 rating for interior areas that stay dry and protected
• Label space/information surface for clearly identifying circuits where needed
• Depth varies with the finish material, so confirm clearance when mounting into thin panels or near trim

Variants

Configurations in this range differ by finish, so the plate can match surrounding joinery, upholstery, or hardware.

Finish options include solid wood, metal, leather, worked stone, and glass or mirror glass. The 7-module layout and 212 mm x 90 mm footprint stay consistent across the range, while overall depth can change with the material used (for example, 9.55 mm on solid wood finishes and 10.55 mm on glass finishes).

Compatibility and fit

Confirm your installation uses the Vimar Eikon module system with a 7-module support frame. This plate is not interchangeable with other formats such as US Decora, UK grid systems, or different Vimar series that use other frames.

If you are fitting it into a yacht joinery panel, make sure the cut-out and support frame sit flat so the plate can clamp on evenly without rocking.

Installation and setup

Fit the support frame and devices first, then clip the cover plate in place once wiring and device alignment are finished. On a boat, it helps to re-check the clamp engagement after the first few runs, especially on helm and companionway bulkheads where vibration is higher.

Materials and care

Clean with a soft cloth. For wood and leather finishes, avoid solvent cleaners and heavy scrubbing that can dull the surface. For metal and glass finishes, a damp cloth with a mild cleaner is usually enough, and abrasive pads should be avoided to keep the finish looking even.

Use on board

This plate suits interior switch and outlet groups in cabins, salons, nav stations, and dry helm areas where you want the wiring devices to blend with the rest of the fit-out. It is a good match for new builds and refits that standardize on Vimar Eikon hardware across multiple spaces.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.