Hella Marine EuroLED 150 Downlight, White Light, Non-Touch, 9-33V

Overview

The Hella Marine EuroLED 150 Non-Touch Lamp is a 150 mm round LED downlight that runs on 9-33V DC and draws 4W, making it a straightforward fit on both 12V and 24V boats.

It recess-mounts into a 124 mm cutout and can also be surface mounted using the supplied spacer. There is no built-in switch or dimming, so it is controlled from a standard on and off lighting circuit.

The lamp is fully sealed to an IP67 level for use in wet areas, with reverse polarity and transient spike protection. A clear, UV resistant enhanced-impact acrylic lens helps spread the light so it feels comfortable when you are looking up at it in cabins, under hardtops, and in covered exterior spaces.

Key features

• Multivolt 9-33V DC input for 12V and 24V systems
• 4W power draw (under 0.33A at 12V and under 0.16A at 24V)
• Recess mount with 124 mm cutout and 150 mm rim diameter
• Approx. 20 mm lamp depth, plus wiring clearance behind the panel
• IP67 sealed housing for wet locations and washdowns
• Reverse polarity and transient spike protection built in
• Pre-wired with 0.5m sheathed multi-core marine cable

Variants

This light is offered with two rim materials while keeping the same lamp size, voltage range, and power draw.

The only change between the variants is the trim material at the rim, which affects appearance and how the visible edge holds up around the mounting surface.

• 980631502: Plastic rim. A clean look for white liners and composite panels, without exposed metal at the trim.
• 980631512: Stainless steel rim. A polished finish that pairs naturally with stainless hardware and wipe-down surfaces.

What's included

• EuroLED 150 lamp with attached cable
• Surface-mount spacer

Installation and setup

For a recessed install, cut a 124 mm hole and confirm you have enough depth behind the panel for the lamp body and cable bend radius. For surface mounting, place the spacer behind the rim and route the cable to a protected connection point.

Wire red to DC positive and black to DC negative. Since this is the non-touch version, switching is handled at your helm or cabin switch panel, or through a relay if you are integrating it into a larger lighting circuit.

Compatibility and fit

Multivolt input (9-33V DC) makes it suitable for most DC house systems, including boats that see voltage swings from charging or long cable runs. The 150 mm rim diameter is useful to know if you are covering an older cutout or matching an existing EuroLED footprint across multiple locations.

This suits owners refitting interior overhead lights, hardtop downlights, or sheltered cockpit lighting where a sealed fixture and consistent, low-glare output matters more than onboard controls.

Maintenance and care

Rinse salt off the lens and rim after heavy spray, then wipe with mild soap and water. Avoid harsh solvents on the lens, and periodically check the cable run and connections so water cannot track into the wiring.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.