TACO Marine Aluminum Overlap Rub Rail, 3/4 in x 3/8 in, 12 ft, Polished Clear Anodized, Drilled for #8 Screws

Overview

The TACO Marine A11-0151TAL12D is a 3/4-inch by 3/8-inch aluminum rub rail for protecting a boat’s hull edge, deck joint, or seam line while keeping the clean look of polished metal. It is supplied in a 12-foot length with a polished clear anodized finish, making it a practical match for refit work, rub rail replacement, and seam protection on fiberglass boats.

This profile works as aluminum edge molding and seam binding, so it can cover vulnerable edges and help take the scuffs that happen around docks, trailers, pilings, and raft-ups. The rail is drilled and countersunk for #8 screws on 6-inch centers, which helps keep fastener spacing consistent during installation.

Key features

• 3/4-inch height and 3/8-inch width for a low-profile aluminum rub rail installation.

• 12-foot length for repairs, replacements, and longer continuous runs along the hull or deck edge.

• Polished clear anodized finish helps the aluminum stand up to marine exposure while maintaining a classic metal appearance.

• Drilled and countersunk for #8 screws on 6-inch centers, reducing layout work during installation.

• Aluminum edge molding and seam binder profile helps protect exposed joints and trim lines.

• Can be formed to a tight radius when handled with the right bending method and installation care.

• Made for use without a separate rub rail insert, keeping the installation simple and clean.

Installation and setup

Use this rail where the boat has the correct 3/4-inch by 3/8-inch profile and where an aluminum rub rail without an insert is the right match for the existing trim. Before drilling or fastening, dry-fit the length along the mounting line and check how the rail sits through curves, corners, and transom transitions.

The pre-drilled and countersunk holes are spaced for #8 screws on 6-inch centers. On older boats, existing holes may not align exactly, so check the substrate and repair or seal previous fastener holes as needed before final installation. Proper bedding and sealing around fasteners are important in wet areas, especially around the hull-to-deck joint.

Fit and use on board

This aluminum rub rail is a good fit for boat owners and yards replacing worn edge trim, restoring a classic metal rub rail look, or adding protection to an exposed seam. It is useful on boats that see regular docking, trailering, and contact with fenders or pilings, where the rail needs to take everyday abrasion before the hull side does.

The polished clear anodized finish gives the rail a bright metal appearance that works well on traditional runabouts, fishing boats, small cruisers, and other vessels using aluminum trim rather than vinyl insert-style rub rail systems.

Maintenance and care

Rinse the rail with fresh water after saltwater use and wash it with mild boat soap during routine cleaning. Avoid aggressive abrasives that can dull the anodized surface. During seasonal checks, inspect the fasteners and sealant line so the rail stays tight and the joint underneath remains protected.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.