i2Systems Apeiron A1120 Tri-Light LED Recessed Downlight, 9-30V DC, IP67, Spring Clip Mount

Overview

The i2Systems Apeiron A1120 is a recessed Tri-Light downlight that gives you three selectable colors from a single fixture using only two wires.

It runs on 9-30 VDC and draws 1.5 W, which works well on typical 12 V and 24 V DC systems when you want low current draw across multiple lights.

The frosted tempered-glass lens spreads a 120 degree full-angle beam for even light without visible LED points, and the sealed construction is rated IP67 for dry, damp, or wet locations on board.

Key features

• Tri-Light operation with three colors in one fixture using only two wires

• Color changes by toggling power off and back on, cycling to the next programmed color

• 9-30 VDC input range with 1.5 W power draw

• 120 degree full-angle beam through a frosted lens for smooth, even illumination

• IP67 sealing for areas that see moisture, spray, and washdowns

• Spring-clip mounting for a 2.75 in (70 mm) cutout

• Trim is about 3.15 in (80 mm) across, with round, square/round, and square/square bezel styles depending on configuration

• Integrated driver with 0-100% dimming support, plus transient protection and reverse-polarity protection

Variants

Configurations vary by bezel shape (Round, Square/Round, or Square/Square), trim finish (Polished Chrome or Brushed Nickel), and the Tri-Light white setting (Warm White or Cool White) paired with Red and Blue.

The electrical rating and mounting dimensions remain consistent across the A1120 Tri-Light range, including 9-30 VDC input, 1.5 W draw, IP67 sealing, a 2.75 in (70 mm) cutout, and a trim size of about 3.15 in (80 mm).

Installation and setup

Plan for a 2.75 in (70 mm) cutout and about 2.39 in (61 mm) of clearance behind the mounting surface for the light body and spring clips. The visible trim measures about 3.15 in (80 mm) across.

Run the wiring before final seating, then push the fixture into the cutout until the spring clips engage and the trim sits flat against the panel.

Electrical and switching

Connect the red lead to a switched 9-30 VDC positive feed and the black lead to DC negative. Do not exceed 30 VDC.

To step through the three colors, cycle power off and back on again. If the circuit is frequently power-cycled, keep in mind the light will advance to the next color after each reset.

Materials and on-board use

The housing uses aluminum with stainless steel trim, and the lens is tempered glass with a frosted diffuser. Polished Chrome and Brushed Nickel finishes help match common marine hardware and interior trim schemes.

This light fits well in overhead and soffit locations such as helms, hardtops, companionways, and cockpit seating areas where you want white light for tasks, red light to preserve night vision, and blue light for low-glare accent lighting.

Maintenance and care

Rinse with fresh water after salt exposure and wipe with mild soap and a soft cloth. Avoid abrasive pads that can scratch the finish or haze the frosted lens.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.