Vimar Arke 1-Way Switch, 1P, 16AX, 250V, Illuminable, Replaceable Button, Grey

Overview

The Vimar VMP19001 is a 1-way (1P1T) Arké switch rated 16AX at 250 V~ for controlling a single circuit from one location. It is lightable, so it can be paired with a compatible Arké illumination accessory when you want a locator or status light on the rocker.

On AC lighting circuits it supports up to 200 W for self-ballasted lamps in line with IEC 60669-1:2017, which matters when you are switching modern lamp loads that have higher inrush current. The grey Arké finish is a common fit for interior panels on boats where the switch stays protected from direct spray.

The front assembly is rated IP40, so it belongs in dry, enclosed areas such as cabins, nav stations, or inside a protected electrical console rather than open cockpits and washdown zones.

Key features

• 1-way, single-pole switching (1P1T) for one circuit from one location
• 16AX, 250 V~ rating for onboard AC circuits within the switch rating
• Max 200 W for self-ballasted lamps (IEC 60669-1:2017)
• Lightable rocker when used with the matching illumination accessory
• Replaceable button for easier cosmetic refresh without disturbing the wiring
• Screw terminal connections for a secure clamp on conductors in vibrating panels
• IP40 front protection suited to interior, protected mounting locations

Compatibility and fit

This is a 1-module device in the Vimar Arké system, intended to be installed behind an Arké cover plate as part of a modular layout. It is a good match when you are standardizing interior switchgear across a refit or keeping a consistent look between different cabins and service spaces.

Allow for a built-in depth of about 25 mm, with an overall device depth around 36.8 mm behind the plate. The front face is roughly 44.8 mm wide by 49 mm high, which can help when checking clearances in tight helm pods and bulkhead panels.

Installation and wiring notes

Wiring is via screw terminals. For marine installs, take the time to strip conductors cleanly, seat them fully, and route wiring so there is no constant pull on the terminals when the boat is pounding. If the panel sees heavy vibration, it is worth rechecking terminal tightness after initial use.

This device is rated for 250 V~. If you are using it in 12 V or 24 V DC systems, treat it as part of a properly engineered DC control scheme where switching method and load type are accounted for, often by switching a relay or contactor rather than carrying higher DC loads directly.

Use on board

It fits well for AC cabin lighting, a utility area light, or a control input that feeds a relay panel while keeping a matching Arké look across the interior. It is a practical choice for builders and refitters who want consistent modular switching in dry, protected spaces.

Maintenance and care

Wipe the rocker and surrounding plate with a damp cloth and mild soap. Avoid harsh solvents that can haze plastics, and keep the installation dry by maintaining the integrity of the box, plate, and any nearby gasketed panels.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.