Attwood Marine Light-Duty Rubber Spool/Keel Roller, 5/8 in Shaft, 3 in OD, Nylon Inserts

Overview

This Attwood Marine light-duty rubber spool/keel roller is a replacement trailer roller for supporting the boat keel and helping the hull track cleanly during launch and retrieval. It is made from molded rubber with nylon inserts, with a 3 in. outside diameter and a 5/8 in. shaft diameter.

This roller fits the keel or spool roller position on compatible boat trailers where a 5/8 in. shaft is used. The light-duty rubber body gives the hull a softer contact point than bare metal and helps guide the boat toward the bow stop when loading at the ramp.

Key features

• Molded rubber construction helps cushion the keel while the boat is sitting on the trailer.
• Nylon inserts support smoother rotation on a compatible 5/8 in. roller shaft.
• 3 in. outside diameter works across the available lengths in this range.
• Helps center and guide the boat during launch, retrieval, and trailering.
• Useful as a direct replacement when an old keel roller is cracked, flattened, swollen, or no longer turning freely.

Variants

This Attwood Marine spool/keel roller is offered in two length configurations for different trailer brackets and keel support positions.

The length changes by variant, while the confirmed 5/8 in. shaft diameter and 3 in. outside diameter remain consistent across the available options.

• 11210-1: 4 in. length. This shorter roller suits trailer locations where the bracket spacing calls for a compact keel support roller.
• 11211-1: 5-1/4 in. length. This longer roller gives more contact width where the trailer bracket and keel position allow the extra length.

Installation and fit

Before replacing a roller, measure the existing roller length, bracket spacing, and shaft diameter. This range is built around a 5/8 in. shaft, so the trailer hardware must match that size for the roller to sit correctly and rotate as intended.

During installation, check that the roller turns freely after the shaft and fasteners are secured. A roller that is too tight, misaligned, or rubbing the bracket can make retrieval harder and can wear unevenly over time.

Use on board and at the ramp

This type of roller is a practical fit for small boat trailers used for fishing boats, runabouts, utility boats, and other trailered craft where the keel needs guided support during loading. It is most useful in the spots that take repeated contact as the boat moves up the trailer and settles against the bow stop.

Maintenance and care

Inspect the roller as part of normal trailer maintenance, especially after saltwater use or long road trips. Rinse away sand and salt, check that the roller still spins, and replace it when the rubber becomes cracked, deeply grooved, or misshapen.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.