Simrad xSonic SS60 Thru-Hull Depth/Temp Transducer, 50/200 kHz, 600W, 12 Degree Tilt, 9-Pin

Overview

The Simrad 000-13785-001 is a stainless steel thru-hull transducer that reads depth and water temperature using a conventional 50/200 kHz element with a 12° tilted insert. It is rated at 600 W and uses a 10 m (33 ft) cable with a Navico 9-pin xSonic-style connector.

The tilt is meant for hull deadrise angles from 8° to 15° at the mounting location, helping keep the beam aimed straight down without a fairing block. The low-profile housing sits close to the hull and extends about 5 mm (3/16 in) outside the boat, and the body measures 84 mm in diameter by 95 mm overall height.

Key features

• Conventional dual-frequency sonar: 50 kHz with a 45° beam and 200 kHz with a 12° beam
• 600 W power rating for traditional 50/200 kHz sounders
• 12° tilted element for 8° to 15° hull deadrise at the install point
• Depth and water temperature sensing
• 10 m (33 ft) attached cable with Navico 9-pin xSonic-style connector
• Low-profile thru-hull body that extends about 5 mm (3/16 in) below the hull
• Stainless steel housing; compatible with all hull materials when installed correctly
• Hull cutout guidance: 60 mm (2-3/8 in) hole for fiberglass or wood; 70 mm (2-13/16 in) for metal hulls

Installation and setup

This is a below-the-waterline thru-hull install, so placement matters as much as the transducer itself. Plan for smooth water flow under the hull, keep it clear of strakes and intakes, and aim for a location that stays submerged across your normal running trim.

For the 12° model, align the arrow on the top of the housing toward the keel or centerline so the internal tilt matches the hull angle. Use marine sealant suitable for below-waterline fittings, route the cable away from ignition wiring and high-current runs when possible, and check for leaks shortly after launch.

Compatibility and fit

The connector is a Navico 9-pin xSonic-style plug used on many Simrad and related sonar-capable displays and sounder modules. Confirm your unit has a matching 9-pin transducer port, or plan for an adapter if your sounder uses a different connector style.

Check hull thickness at the mounting point before drilling. The usable shaft length is 68.5 mm (2.70 in), and metal-housed thru-hulls must be installed with proper isolation practices in metal hulls to reduce the risk of electrolytic corrosion.

Use cases on board

This transducer is a good match for boats that want a traditional 50/200 kHz depth sounder and dependable temperature readings without adding a fairing block. It is commonly used on smaller fishing and cruising boats where a low-profile thru-hull helps keep drag and spray down.

Maintenance and care

Keep the face clean for consistent sonar returns and avoid harsh solvents when washing around the transducer. In saltwater, a water-based antifouling coating on the transducer face is commonly used to slow marine growth, and the cable should not be used as a lifting or pulling point during service.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.