Garmin GPS Antenna Cable, BNC Connectors, 10 m

Overview

The Garmin 010-11454-00 is a 10 m (32 ft) antenna cable with BNC connectors on both ends for running an external GPS antenna to compatible Garmin marine electronics. It is used when the antenna needs to be mounted away from the display or black box so it can “see” the sky while the electronics stay protected at the helm, nav station, or inside the console.

On most boats, this is the clean way to reach a hardtop, radar arch, or mast mount without splicing coax. It is an antenna signal cable only and does not replace any power, NMEA 0183, or NMEA 2000 wiring.

Before ordering, confirm your equipment has a BNC antenna connection on the unit side and that your antenna lead also terminates in BNC. If your antenna or device uses SMA or another connector style, it will not mate directly.

Key features

• 10 m (32 ft) length for routing from a sky-view antenna location back to the electronics mounting position
• BNC connectors on both ends for systems that use BNC antenna ports
• Commonly paired with Garmin GA 38 passive GPS/GLONASS antenna installations that use a coax connection
• Used in Garmin AIS 600 installations that accept a BNC-connected GPS antenna feed
• Allows a single uninterrupted run to reduce loss and avoid in-line splices in wet lockers and cable chases

Compatibility and fit

This cable is a match when both the antenna and the receiving device use BNC for the antenna connection. It is typically used to link an external GPS antenna to a compatible Garmin chartplotter, AIS black box, or VHF/AIS system that supports an external antenna input. If your setup relies on a different connector type at either end, plan for the correct cable style rather than forcing a fit.

It is a good match for boats that keep electronics below deck or behind the helm and want the antenna mounted where it has a clean view of the sky, such as on a hardtop, radar arch, or a sailboat rail or mast bracket.

Installation and routing

Dry-fit the route first and leave a small service loop at both ends so the connectors are not under tension. When pulling through conduit or a rigging tube, protect the BNC ends from snagging and avoid tight bends that can kink coax. Secure the run at intervals to prevent chafe and vibration wear, especially where it passes through bulkheads or under a deck edge.

BNC connectors lock with a push and twist motion. Make sure each end is fully seated and locked, and keep any connector junctions out of standing water. In exposed areas, add strain relief and weather protection appropriate for your installation location.

Maintenance and care

Periodically inspect the cable where it is clamped and where it enters compartments, looking for flattening, chafe, or corrosion at the connectors. If you remove the cable during service, keep the BNC ends clean and capped until reinstalled to avoid contamination that can affect antenna performance.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.