Garmin Trolling Motor Transducer Mount, For GT36 and GT56, 12-Pin

Overview

The Garmin 010-13071-00 is a trolling-motor transducer mount for Garmin GT36 and GT56 scanning transducers. It straps to the trolling motor housing with hose clamps and keeps the transducer tucked in close, which helps reduce the chance of snagging when you are working around weeds, timber, docks, or a rocky bottom.

The mount fastens to the transducer using M4 hardware and gives you multiple cable-exit routes so the cable can be routed to the top side of the trolling motor housing when the motor is stowed. It is a good match for boats that rely on bow-mounted scanning sonar while fishing, especially when the trolling motor gets deployed and stowed often and clean cable routing matters.

Key features

• Mounting solution for Garmin GT36 and GT56 scanning transducers on a trolling motor
• Clamp-on attachment to the trolling motor using hose clamps through integrated slots
• Low-profile shape that keeps the transducer close to the motor housing for better protection from underwater obstructions
• Multiple cable-exit paths to help route the transducer cable to a non-pinch point when the motor is stowed
• Supports a parallel-to-bottom transducer orientation when the trolling motor is deployed

Compatibility and fit

This mount is intended for GT36 and GT56 scanning transducers that use the matching trolling-motor mount interface. It is not a universal transducer bracket, so confirm your transducer model before ordering.

This is a mechanical mounting accessory. Sonar and connector compatibility is determined by the transducer version you are installing and the Garmin electronics it will plug into, not by the mount itself.

Installation and setup

Attach the mount to the transducer using M4 screws and star washers, then select a cable exit that keeps the cable on the top side of the trolling motor housing when the motor is stowed. The mount is built with multiple exit routes so you can choose the cleanest path for your specific trolling motor.

Feed hose clamps through the mount slots, position the transducer so the narrow end points away from the propeller, and tighten the clamps evenly. Secure the cable along the trolling motor shaft so it cannot get pinched during deploy and stow, and route it away from other wiring where possible to help avoid electrical interference.

Use and care on board

After the first trip, recheck clamp tension and cable routing since the mount can settle slightly once it has seen vibration and real water loads. In saltwater, a quick rinse and a periodic look at clamp condition and cable chafe points will help keep the install trouble-free.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.