Hella Marine ValueFit Design LED Light Bar, 11 in, Combo Beam, 10-30V, 60W, 3000 lm

Overview

The Hella Marine 357209001 is a ValueFit Design Series 6-LED light bar with a combo beam for deck, spreader, and general work lighting on boats. It runs on 10-30 V DC (12 V and 24 V systems) and draws 60 W.

Light output is rated at 3,000 lm, and the housing carries an IP67 rating for spray and washdowns when installed with proper sealing and wiring protection. The bar measures 289 x 65 x 90 mm (11.37 x 2.56 x 3.54 in) and uses a die-cast aluminum housing with a clear polycarbonate lens.

This size and beam style make sense when you want one fixture that can light up a working area close to the boat while still throwing useful light forward for docking, line handling, and after-dark tasks.

Key features

• 6 high-power LEDs with a combo beam pattern (wide spread with added reach)
• 10-30 V DC input for common 12 V and 24 V electrical systems
• 60 W draw, roughly 5 A at 12 V and 2.5 A at 24 V for circuit planning
• IP67-rated enclosure for wet environments and regular washdowns
• Die-cast aluminum housing with a clear polycarbonate lens
• Overall size: 289 x 65 x 90 mm (11.37 x 2.56 x 3.54 in)
• Stainless steel mounting fasteners help reduce corrosion issues in saltwater use

Installation and setup

Mount it where the beam can do its job without shining directly into the cockpit or reflecting off shiny hardware. On a hardtop, radar arch, or mast spreader, aim the bar slightly down so light lands on the deck and transom area instead of the horizon.

Use a backing plate or substantial washers on thin panels, and bed any fastener penetrations so water stays out of the core. If mounting to aluminum structures, take basic anti-galvanic precautions at the hardware and contact points.

Electrical and system integration

This is a straightforward DC light with wire leads, so it ties into your existing switched circuit rather than a marine network. Plan a clean run back to a protected distribution point, and use tinned marine wire with heat-shrink terminations to keep corrosion out of the connections.

Because it is a 60 W load, pay attention to voltage drop on longer runs to towers, arches, and spreaders. Keeping the wiring sized for the run and the environment helps the light stay bright at the fixture when the alternator is not running.

Compatibility and fit

The 289 mm overall length suits smaller boats where a long bar would look out of place or be hard to mount. It is also a practical option on sailboats where a compact spreader light can be positioned to light the foredeck without adding much windage.

This is auxiliary lighting meant for working areas and visibility around the boat. It is not a navigation light and should not be used in place of required running lights.

Maintenance and care

Rinse with fresh water after salt exposure and check mounting hardware periodically for tightness, especially if the boat sees pounding or vibration. Clean the polycarbonate lens with mild soap and water and avoid harsh solvents that can haze plastic over time.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.