Jabsco Amazon Universal Manual Bilge Pump, 22 GPM, 1-1/2 in Hose

Overview

The Jabsco 29270-0000 is a manual bilge pump for 38 mm (1-1/2 in) hose, with output up to 22 GPM (83 LPM). It can be mounted on a bulkhead, through a bulkhead, on deck, or through deck with the optional kit, which gives more freedom when handle access and hose routing matter as much as the pump location itself.

This pump is built for clearing standing bilge water and it can also be used for holding tank discharge where a manual pump with solids handling is required. The inlet and outlet ports can be swapped to reverse flow direction, and the clamp ring opens quickly for cleaning or service if the line picks up debris. A push-fit elbow is supplied, which helps when the hose needs a cleaner turn behind panels or under a deck surface.

Key features

• Fits 38 mm (1-1/2 in) ID hose.
• Manual output up to 22 GPM (83 LPM), with actual flow depending on installation and pumping rate.
• Mounts on bulkhead, through bulkhead, on deck, or through deck with the optional through-deck kit.
• Flow direction can be reversed by exchanging the inlet and outlet ports.
• Quick-release clamp ring gives faster access for blockage clearance and service.
• One push-fit elbow is included, and optional elbows can swivel 360 degrees to help with hose runs.
• Supplied with a detachable stainless steel handle, mounting clips, and provision for a safety lanyard.

Installation and fit

The nominal pump dimensions are about 240 mm long, 210 mm wide, and 150 mm high, with a 260 mm handle. On a boat, the real fit check is not just the pump body. Make sure there is room for the full handle stroke, enough clearance for the hose bends, and a mounting face that lets the handle work comfortably without fouling lockers, liners, or deck framing.

If you are planning a through-deck layout, the optional kit lets the same pump be worked from inside or outside the cabin. That is useful on sailboats and enclosed wheelhouse boats where the pump needs to stay accessible when the weather turns bad.

Use on board

This is a sensible match for boats that want a manual dewatering pump alongside their electric bilge setup, and for installations where the mounting face is dictated by the boat rather than by the shortest hose run. It also suits owners who want one manual pump that can serve both bilge duty and approved holding tank discharge duty.

It is meant for standing bilge water, not for keeping pace with uncontrolled flooding through hull damage. For routine service, the quick-access body layout is helpful on boats that see dirty bilges, fishing debris, or long periods between clean-outs.

What’s included

• Manual bilge pump
• Detachable stainless steel handle
• One push-fit elbow
• Mounting clips

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.