Jabsco Impeller Kit, 8-Blade, Neoprene, 2-9/16 in Diameter x 3 in Depth, 5/8 in Shaft Diameter, Spline Drive, Brass Insert

Overview

The Jabsco 17018-0001-P is a neoprene flexible impeller for pumps that use an 8-blade rotor with a 2-9/16 in outside diameter, 3 in depth, 5/8 in shaft diameter, and spline drive.

This is the kind of replacement part boat owners usually need for raw-water pump service, where exact fit matters more than anything else. The 3 in depth is a key detail here, because impellers with the same diameter and shaft size can still be wrong if the width or drive style does not match.

Neoprene is commonly used for engine cooling and general water transfer duty. On board, this impeller makes sense as both a scheduled service item and a spare kept in the engine room, since a worn or damaged impeller can reduce cooling water flow without much warning.

Key features

• 8-blade neoprene impeller for flexible impeller pumps used in marine water service
• Exact fit dimensions of 2-9/16 in diameter x 3 in depth with a 5/8 in shaft diameter
• Spline drive hub for pumps that require this drive pattern
• Brass insert at the hub for the specified shaft connection
• Useful replacement for raw-water cooling systems and other water-transfer pumps that match these measurements and drive type

Compatibility and fit

Before ordering, match all of the critical fit points on the old impeller or the pump data: outside diameter, depth, shaft diameter, blade count, material, and drive style. Diameter alone is not enough. An impeller that is close in size but different in depth or hub pattern can install poorly, prime badly, or damage the pump body and cover.

This part is a good match for owners servicing a flexible impeller pump on an inboard engine, generator, or utility water pump where these dimensions are already known. It is especially useful for skippers who do their own routine maintenance and want the correct spare on board rather than a near match.

Installation and service

When replacing the old impeller, remove the end cover and pull the impeller from the hub with the proper tool or by gripping the hub carefully. Avoid levering against the pump body with screwdrivers, since that can mark the sealing face and lead to leaks.

Before startup, apply a light coating of grease to the new impeller and the pump bore so it slides in cleanly and has protection during initial prime. Replacing the impeller on a regular schedule and carrying a spare on board is standard practice for boats that depend on raw-water cooling.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.