Raymarine Type 3 Hydraulic Pump, ACU-400 Compatible, 350-500cc Rams
SKU: APL304481-V1 Part number: M81122 Barcode: 023193811222
Ships free. Expected to arrive between and .
Description
Overview
The Raymarine Type 3 Hydraulic Pump is a reversing hydraulic autopilot pump for boats with hydraulic steering systems and steering ram capacity from 350 to 500 cc, equal to 21 to 30.5 cubic inches. It connects into the hydraulic steering lines so a Raymarine autopilot can move steering fluid and control the rudder or drive while the vessel remains under normal manual steering when the autopilot is not engaged.
For fit decisions, the key checks are ram capacity, system voltage, ACU compatibility, and mounting space. The Type 3 range is available in 12V and 24V versions, works with ACU-400, uses 1/4 inch BSPP hydraulic ports, and has an IP67 motor rating for below-deck marine installations.
Key features
- Reversing hydraulic pump for Raymarine autopilot systems on boats with existing hydraulic steering.
- Type 3 sizing supports 350 to 500 cc steering rams, equal to 21 to 30.5 cubic inches.
- Available in 12V and 24V DC versions so the pump can match the vessel’s electrical system.
- Works with Raymarine ACU-400 for Evolution autopilot installations.
- Peak no-load flow rate of 3100 cc/min, equal to 189.2 cubic inches/min, for Type 3 hydraulic steering response.
- Compatible with single or double-ended rams, balanced or unbalanced cylinders, and pressurized reservoir systems.
- Motor has an IP67 rating and the pump is protected for use in engine compartments.
- 1/4 inch BSPP ports and M6 mounting holes support hydraulic installation planning.
Variants
This Type 3 pump range is offered in two electrical versions. The hydraulic application stays the same: a Type 3 reversing hydraulic pump for steering rams from 350 to 500 cc.
The part number changes with system voltage. The voltage must match the boat’s DC supply and the autopilot ACU.
- M81122: Voltage 12V. This version is for 12V DC systems and is listed for use with ACU-400.
- M81124: Voltage 24V. This version is for 24V DC systems and is listed for use with ACU-400.
Installation and setup
Install the pump below deck on a substantial structure where the hydraulic pipes are not placed under strain. It can be mounted in any orientation, although a motor-up position is preferred when the unit is mounted vertically. The location should be clear of spray, possible immersion, excess heat, fumes, and areas where flooding is likely.
The pump should sit as close to the steering ram as practical and level with or above the ram to help keep air from collecting. All pump ports are 1/4 inch BSPP, with the reservoir line routed in a continuous rise to the helm pump or reservoir. The reservoir port must remain connected and should not be plugged.
Compatibility and fit
Before installation, confirm the hydraulic cylinder ram volume from the steering system documents or from the cylinder model. This pump is the Type 3 size, so it is not the right hydraulic match for smaller ram capacities below 350 cc or larger rams above 500 cc.
It is a good match for boats already using hydraulic steering where an Evolution autopilot is being added or serviced, including cruising and fishing vessels with steering gear in the Type 3 ram range. For mechanical steering, it can be used only as part of a secondary steering ram installation.
Electrical and hydraulic integration
The pump motor connects to the autopilot drive output through the course computer or Evolution ACU. Keep power off while wiring, keep the pump cables and ferrites intact, and maintain separation from VHF, SSB, radar, and other transmitting equipment where space allows.
Hydraulic cleanliness matters on this installation. Use hoses and fittings with pressure ratings that meet or exceed the steering system requirements, avoid PTFE tape or pipe sealing compound on the hydraulic ports, and bleed all trapped air from the system after the pump and the rest of the autopilot have been installed.
Maintenance and care
After installation, inspect the mounting hardware, pipes, and cables periodically. Loose mounts, worn hoses, or damaged wiring can affect steering feel and autopilot performance, especially on boats that see vibration, heat, and saltwater service.
M81122 M81124Specifications
- Installation
- Screws
- Product Color
- Black
- Product Material
- Stainless Steel
- Product Type
- Hydraulic Pump
- Breaking Capacity
- N/A
- Electric Current (Power)
- Direct Current (DC)
- Operating Voltage
- 12V, 24V
Reviews (0)
Shipping and delivery
Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.
Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.
We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.
Learn more.
Returns and refunds
Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.
To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.
Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.
After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.
For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.
Learn more.
Product warranty
Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.
If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.
Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.
Learn more.

