Attwood Marine Quick-Release Transom Tie-Down Straps, 2 in x 4 ft, Pair

Overview

The Attwood Marine 15232-7 is a pair of quick-release transom tie-down straps for securing a trailered boat at the stern. Each strap is 2 inch wide and 4 foot long, with an over-center buckle that tightens by pressing the handle and releases by lifting it. Used between the boat's transom tie-down points and the trailer, they help limit vertical and lateral movement and reduce the bouncing that can happen in transit.

The webbing is made to handle common trailering exposure to rot, oil, gasoline, and many chemicals. Heavy-gauge S-hooks have a vinyl coating to help avoid marks on the boat or trailer, and the buckle area includes a protective pad that helps keep gel coat and painted surfaces from getting scuffed during transport.

Key features

• 2 inch x 4 foot strap size for rear tie-down duty on larger trailered boats
• Quick-release over-center buckle for fast tensioning and easy release at the ramp or in storage
• Heavy-gauge S-hooks with vinyl coating to help protect the boat and trailer finish
• Protective pad behind the buckle helps reduce contact marks on gel coat and painted surfaces
• Hook-and-loop closure helps keep the buckle handle in the locked position
• Webbing resists rot, oil, gasoline, and many chemicals often found around trailers, ramps, and service areas

Compatibility and fit

These straps are intended for boats that use stern transom eyes or other suitable rear tie-down points together with matching trailer anchor points. The 2 inch width gives a broad contact area, and the 4 foot length suits setups where the trailer tabs and the boat's rear tie-down points are not directly in line.

Before ordering, check the distance from the trailer anchor point to the boat's rear tie-down point with the boat fully seated on the trailer. That is the best way to confirm strap reach and hook placement for your specific hull and trailer combination.

Installation and use

Hook each end in place, remove the slack, and press the buckle handle down until the strap is tight and locked. The protective pad should sit where the buckle could otherwise touch the hull or another finished surface. After a short drive, it is worth checking strap tension again, especially on a newly loaded boat or trailer setup.

This strap set is a good match for boat owners who trailer regularly and want a stern tie-down that tightens and releases without using a ratchet. It also makes sense where gel coat and painted surfaces need a little more protection around the buckle contact point.

What’s included

• One pair of quick-release transom tie-down straps

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.