Lumishore SUPRA THX404 Thru-Hull Underwater LED Light, Dual-Color Blue/White, 8150 lm, 10.5-31V, IP68, External Driver

Overview

The Lumishore 010-04516-00 is a SUPRA THX404 thru-hull underwater LED light with an external driver, giving you blue and white output on 10.5 to 31 V DC systems.

In white mode it produces up to 8,150 fixture lumens with a 110 degree beam, and the assembly is IP68-rated for permanent underwater mounting. From the outside you get a flush face that measures 86 mm (3.39 in) across with an 11 mm (0.43 in) profile.

The driver handles color switching plus dimming, fade and strobe modes. The light lead is a 3 m (9.8 ft) pre-terminated cable, so it helps to plan the driver location and cable route before drilling.

Key features

• Dual-color output (blue and white) with brightness control plus fade and strobe modes
• 8,150 fixture lumens (white) and a 110 degree beam for a broad spread of light
• Supply voltage range: 10.5 to 31 V DC; max current draw 6.4 A at 12 V or 3.2 A at 24 V
• IP68 water-ingress rating for below-the-waterline installation
• Thru-hull format with a 140 mm (5.51 in) shaft length and a 27 mm (1-1/16 in) shaft cut-out
• Marine bronze body with a borosilicate glass lens
• 3 m (9.8 ft) pre-terminated light cable; driver has a 1 m (3 ft) power lead
• Driver protections include surge protection, reverse polarity protection and automatic thermal roll-back

What's included

• SUPRA THX404 thru-hull light module
• External driver module

Installation and setup

This is a thru-hull install, so you will want solid access on both sides of the mounting area for drilling, sealing, and tightening the hardware. The light is intended for a flat mounting surface on the transom or side hull, and it is typically placed 150 to 250 mm (6 to 10 in) below the minimum load waterline.

The face sits nearly flush outside the hull, while the body and cabling land inside. Allow room for the 140 mm shaft, the connector, and a clean cable bend so the lead is not pulled tight when the boat flexes or slams in a chop.

Electrical and control

Power is straightforward DC through a proper fuse or breaker. A 10 A fuse is specified for 12 V installations, and a 5 A fuse is specified for 24 V installations. Mount the driver in a dry, well-ventilated location inside the boat and keep power runs as short as practical to avoid voltage drop.

For control, the light ties into a SUPRA i-Connect Hub and Switch, and it can also be controlled from a compatible MFD when a SUPRA Bridge module is added. That helm control is what enables the mode changes, dimming, fade, and strobe functions without adding separate switches at the transom.

Compatibility and fit

The 10.5 to 31 V DC input range covers common 12 V and 24 V battery systems, which makes it suitable for a wide range of center consoles, sportfishers, express boats, and cruisers. If you are working with a metal or carbon hull, plan on isolating the thru-hull body per standard practice for underwater fittings.

This light is a good match for owners who want a thru-hull style install with two usable colors and the option to run lighting scenes from the helm, while keeping the external profile low on the transom.

Maintenance and care

Like any underwater light, output drops when the lens gets a film of growth. A quick wipe during routine hull cleaning keeps the beam looking even. Avoid abrasive pads that can scratch the glass and make growth stick faster.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.