Lumishore ORA TIX204 Interchangeable Thru-Hull Underwater LED Light, Green Light, 12/24V DC, 60 Deg Beam, Marine-Grade Aluminum Bronze Housing, Built-In Driver

Overview

The Lumishore 010-04525-00 is an ORA TIX204 thru-hull underwater LED light that sits flush and outputs single-color green light on 12 V or 24 V DC boats. The beam is a focused 60 degree pattern, with a 5,300 fixture-lumen rating and a listed lumen figure of 11,925 for the series.

An internal driver is built into the light, so it runs from a standard on/off switch and does not need an external driver box. The housing is sealed to an IP68 water-ingress rating and uses a marine bronze body with a borosilicate glass lens for continuous submersion. Typical LED life is 50,000+ hours.

Installation is a true thru-hull with a 28 mm (1-1/8 in) shaft hole. The face is 65 mm in diameter with a low 9 mm profile at the hull, the shaft length is 167 mm, and it supports hull thickness up to 110 mm. The attached two-core power cable is 2 m (6 ft 6 in), and the insert module can be serviced from inside the hull when there is more than 7 inches of internal clearance.

Key features

• Single-color green underwater output with a 60 degree beam
• 12/24 V DC input with a 10.5 to 30 V DC operating range
• Max current draw: 4.0 A at 12 V and 1.9 A at 24 V
• Internal driver with protections including soft start, reverse polarity protection, surge protection (3,000 V), and automatic thermal roll-back
• IP68 sealing for continuous submersion
• Marine bronze body with a borosilicate glass lens
• Flush face: 65 mm diameter with a 9 mm housing profile
• 28 mm (1-1/8 in) thru-hull cut-out with a 167 mm shaft length for hull thickness up to 110 mm
• 2 m (6 ft 6 in) two-core power cable attached to the light
• On/off switch control (switch is third-party supplied)
• Bonding connection provided on the light, with hull isolation sleeve options available when required

What’s included

• One ORA TIX204 underwater light with built-in driver (green output)

Installation and setup

Mark the mounting point and confirm there are no internal obstructions before drilling. The shaft requires a 28 mm (1-1/8 in) hole, and the inner hull surface should be sealed properly before the thru-hull assembly is secured to prevent water intrusion into the laminate or core.

Keep the hull surface clean and free of grease before bedding the flange, and remove any antifoul around the mounting area. Avoid alcohol-based solvents during prep since they can affect sealants used at the hull interface. After tightening, align the module flats vertically so the insert seats correctly.

A bonding connection is provided on the light for boats with a bonding system. When an isolation sleeve kit is used for hull isolation, follow the sleeve instructions and do not bond the light.

Electrical and system integration

This light connects to DC power through its two-core cable and is controlled by a standard on/off switch. Use a properly sized fuse or breaker based on the current draw and your wiring run, and keep voltage drop under control on long runs, especially on 12 V systems.

For wire sizing, common guidance is to limit voltage drop to 3% on 12 V DC circuits and 10% on 24 V DC circuits for lighting loads. If the factory cable is not long enough, make splices in a dry, protected location with marine-grade connectors and watertight strain relief.

Placement and use on board

The ORA TIX204 format supports transom, hull-side, or bottom mounting, so it can work on everything from center consoles to cruisers that have the inside clearance needed to service the insert module. Green underwater lighting is often used around the dock and at anchor, and it is also common for anglers who like a green wash around the boat at night.

Maintenance and service

Rinse the lens and face after saltwater use and clean with mild soap and water when needed. Periodically inspect the bedding line at the hull and check for any signs of movement, damage, or leakage.

Service access is from inside the hull, so the insert module can be removed without hauling the boat when the light is installed with adequate internal clearance. When opening for service, keep the sealing surfaces clean and confirm the O-ring is seated properly before reassembly.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.