Lumishore SUPRA TIX404 Thru-Hull Underwater LED Light, Dual-Color Blue/White, 8,150 Fixture Lumens, 10.5-31V, IP68, 110 Degree Beam

Overview

The Lumishore 010-04526-00 is a dual-color (blue/white) interchangeable thru-hull underwater LED light that runs on 10.5 to 31 V DC and puts out 8,150 fixture lumens (white) across a 110° beam.

It is IP68-rated for continuous immersion and uses a marine bronze body with a borosilicate glass lens. Plan for a 57 mm (2.25 in) hull cut-out, an 88 mm (3.47 in) outside face, and 136 mm (5.35 in) of shaft length on the inside.

A 3 m (9.8 ft) pre-terminated light cable is included, so you can route the lead cleanly without splicing at the fixture.

Key features

• Dual-color output: switch between blue and white at the fixture’s full rated power
• 8,150 fixture lumens (white) with a 110° beam for a wide wash across the transom or hull side
• 10.5 to 31 V DC input range for 12 V and 24 V electrical systems
• Maximum current draw: 6.4 A at 12 V DC, 3.2 A at 24 V DC for circuit planning
• IP68 water-ingress rating for below-the-waterline installs
• Marine bronze body with a borosilicate glass lens
• Low-profile 88 mm (3.47 in) face with an 8 mm (0.32 in) housing profile
• 3 m (9.8 ft) factory-terminated cable with plug-and-play connection

Installation and setup

This is a thru-hull install that requires drilling and sealing a 57 mm (2.25 in) hole, then tightening the cartridge so the outside face sits flush on a flat section of hull. It is intended for transom or side-hull mounting rather than curved sections.

Typical placement is 150 to 250 mm (6 to 10 in) below the minimum loaded waterline, with multiple lights spaced about 0.8 to 2 m (2.5 to 6.5 ft) apart for an even spread. Use a marine adhesive sealant such as 3M 4200 or equivalent, and keep retaining bolt torque under 3 Nm.

Do not attempt installation or removal with the boat in the water.

Electrical and control

The internal driver accepts 10.5 to 31 V DC for 12 V and 24 V systems. Fuse sizing is typically 10 A on 12 V installations or 5 A on 24 V installations.

The light lead is factory-terminated and should not be cut. Route the cable to a dry, protected connection point and keep all power connections waterproof with a junction box or rated connectors.

If you extend the light-to-control cable, keep total length within 6 m (20 ft) on 12 V systems or 9 m (30 ft) on 24 V systems to help avoid voltage drop and control issues.

With compatible control hardware, the light can be toggled between white and blue and can also run fade and strobe modes.

Materials and corrosion protection

The body is marine bronze with a borosilicate glass lens, and the unit includes a bonding connection point for galvanic protection on fiberglass and wooden hulls.

For metal or carbon fiber hulls, an isolation sleeve is required; in that case, the light should not be bonded.

Avoid mounting near hot engine components or exhaust outlets, and keep exposure temperatures below 65°C (150°F).

Maintenance and care

Inspect the locking nut and retaining bolts regularly and re-check cable attachments. A monthly inspection schedule works well on boats that stay in the water.

Clean the lens and face as growth builds up using a soft cloth or a soft bristled brush. Avoid abrasive pads, harsh cleaners, and pressure washing, which can scratch the lens and compromise the seal.

Use cases on board

Blue output is often used for low-glare night lighting at anchor or at the dock, while white output is helpful when you want to light up the wake or a swim platform for boarding and deck checks.

This style of light is a good match for cruisers and fishing boats that want a wide 110° spread from a flush thru-hull fitting and have access inside the hull for a proper sealed install.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.