Lumishore ECLIPSE DL55 LED Downlight, RGBW, 12V, IP67

Overview

The Lumishore 010-04540-00 is a 12 V DC recessed downlight with white light plus RGB color, built for overhead mounting in interior and exterior areas on a boat.

It runs on 10 to 15 V DC and draws up to 0.4 A, so it fits cleanly on typical 12 V lighting circuits. The sealed front is rated IP67 for spray and routine washdowns.

For fit planning, the bezel measures 64.0 mm (2.519 in) and the cutout is 50.8 mm (2.0 in). The body depth is about 21 mm (0.83 in), which helps when headliner or hardtop space is tight.

Key features

• 12 V DC only (10 to 15 V DC) with max current draw of 0.4 A
• White light plus RGB color output for general lighting and accent scenes
• IP67-rated sealed front for wet areas and frequent washdowns
• Low depth around 21 mm (0.83 in) for thin panels and tight overhead cavities
• 64.0 mm (2.519 in) bezel with a 50.8 mm (2.0 in) cutout
• Two-wire hookup with spring-clip retention for a clean, flush install

Compatibility and fit

This downlight is for 12 V DC systems only. If your boat is primarily 24 V, plan on a proper 12 V feed or a converter that can hold the supply in the 10 to 15 V DC range under load.

Check the 2.0 in (50.8 mm) cutout and confirm you have about 0.83 in (21 mm) of clearance behind the panel for the light body and wiring bend radius.

Installation and setup

It mounts as a recessed fixture using spring clips, so the usual workflow is to mark the location, cut a 2.0 in (50.8 mm) hole, then feed the two conductors through before seating the light into place until the bezel sits flush.

On cored panels or any overhead area that can get wet, sealing the cut edge of the hole helps keep moisture out of the laminate and prevents swelling around the opening over time.

Electrical and control

Wiring is a simple two-wire connection. Protect the circuit with an appropriately sized fuse or breaker for the wiring and total lighting load, and keep connections crimped, sealed, and supported so vibration does not work them loose.

Basic on and off control works from a standard switch. RGB color selection and scene control require a compatible controller when you want more than simple on and off behavior.

Use cases on board

This style of low-profile downlight makes sense for cabin headliners, companionway overheads, hardtops, and cockpit overhangs where you want one fixture that can handle white light for tasks and RGB for ambience.

It is a good match for boats with 12 V lighting circuits that need an overhead light in a damp area and still want color options without taking up much depth behind the panel.

Maintenance and care

After saltwater runs, a quick fresh-water rinse around the bezel helps keep deposits from building up. Avoid harsh solvents on the lens, and re-check wiring support if the fixture has been removed for access behind the panel.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.