JL Audio M6-880ETXv3 Enclosed Tower Coaxial Speaker System, 8.8in, 125W RMS Each, 4 Ohm, Gloss White Enclosure, Gloss White Classic Grille, Black Tweeter Mesh, 2pk

Overview

The JL Audio 010-03280-00 is an 8.8-inch marine enclosed tower coaxial speaker system sold as a pair, built around a 4-ohm load with 125 W continuous power handling per speaker.

Each enclosure measures about 8.80 in across and 14.73 in deep, which helps when you are checking tower clearance under a bimini or hardtop. Finish is a gloss white enclosure with a gloss white trim ring and gloss white Classic grille, plus a black mesh over the 1.25-inch silk-dome tweeter. This configuration is also referenced as M6-880ETXv3-Gw-C-GwGw.

They mount using compatible clamp fixtures that are required and sold separately, with wiring routed through the fixture for a cleaner run on a tower or arch. Plan amplifier power in the 50 to 250 W per channel range and keep wiring and connections suited for wet, vibrating spaces on board.

Key features

• 8.8-inch (224 mm) enclosed tower coaxial speakers, sold as a pair
• 4-ohm nominal impedance; 125 W RMS continuous power handling per speaker
• Recommended amplifier power: 50 to 250 W per channel
• Frequency response: 38 Hz to 20 kHz (plus or minus 3 dB); sensitivity 90.5 dB at 1 W/1 m
• Enclosure diameter 8.80 in; enclosure depth 14.73 in; height with clamp receiver 9.67 in
• Injection-molded enclosure with a mica-filled polypropylene woofer cone and synthetic rubber surround
• 1.25-inch silk-dome tweeter with black mesh and a built-in 2-way crossover
• Gloss white enclosure with gloss white trim ring and gloss white Classic grille
• Mounting clamps and fixtures are required and sold separately

What's included

• Two enclosed tower coaxial speaker systems (pair)

Installation and setup

These speakers are meant to mount high on a wake tower, T-top, arch, or hardtop using the matching clamp fixtures. Measure your tube or mounting surface first, then select a fixture style and diameter that matches the mount and the aiming you need.

Leave room for the enclosure depth, and make sure the speaker will clear bimini hardware and board racks through the full range of movement. Route speaker wire through the tower when possible, use tinned copper marine cable, and seal any pass-through points to keep water out of the tube.

Compatibility and system planning

Each speaker presents a 4-ohm load, so most marine amplifiers can drive them directly on a single channel per speaker. If you are bridging channels or wiring multiple speakers together, confirm the final impedance stays within your amplifier's limits.

The passive crossover is built in, so you feed it a full-range amplified signal. Set gain and filtering at the amplifier to match the way you listen on the water.

Use cases on board

This setup is a practical match for wake and surf boats that need tower audio to carry back to the rider, and for open-cockpit boats that want more output up top without cutting into interior panels. It also fits well in systems already running an external amplifier in the 50 to 250 W per channel range.

Maintenance and care

After saltwater use, rinse the enclosures and grilles with fresh water and let them dry before covering the boat. Periodically recheck clamp hardware and inspect wiring at the tower base for chafe.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.