Vimar Surface-Mount IP55 Junction Box, 150x110x70mm, 20/25mm Cable Entries, 10 Inlets

Overview

The Vimar VMV55106 is an IP55-rated surface-mount junction box sized 150 x 110 x 70 mm for protecting electrical splices and terminations in damp, splash-prone areas on a boat.

The enclosure is plastic with a grey RAL 7035 finish, and the cover closes with stainless steel screws. Cable entries use trimmable step membranes and suit 20 mm or 25 mm conduit, which helps keep runs neat and reduces cable movement where vibration is constant.

This box makes sense for deck and cockpit accessories, console wiring, and locker or lazarette circuits where you want connections enclosed and protected, but you are not installing in a space that can flood or remain submerged.

Key features

• IP55-rated enclosure for protection against dust and water spray
• 150 x 110 x 70 mm surface-mount box for bulkhead or overhead installation
• Up to 10 cable entry points with trimmable step membranes
• Entry system sized for 20 mm and 25 mm conduit
• Cover secured with stainless steel screws to hold tight in vibration-prone installs
• Rated insulation voltage (Ui): 450 V
• Working temperature range: 0 C to 60 C
• Grey RAL 7035 finish for a clean, low-contrast look in equipment spaces

Compatibility and fit

The rectangular body is intended for surface mounting, so it works well when you do not have the depth for a recessed box. Plan space around the lid so it can be removed for inspection and future service, especially if the box is mounted under a hardtop or inside a console.

The conduit-friendly entries are useful when you are protecting cable runs through lockers, under gunwales, or along a bulkhead where chafe protection matters.

Installation and setup

Mount the box on a flat surface and route cables so they approach from below or from the side when possible. Leave enough slack to open the cover without pulling on splices, and secure the cable run nearby so the entry points are not taking the full load of vibration.

Trim only the membrane steps you need for the cable or conduit size being used. Keep outer jackets intact into the box so water does not track along conductors, and keep unused entries sealed.

Electrical and system integration

This is a protective enclosure, not a terminal block by itself, so connection quality depends on the splices and terminations you install inside. Use tinned marine conductors and sealed connectors suited to your circuit, and keep connections positioned so the lid can close without pinching insulation.

Maintenance and checks

After the first few outings, check that the cover screws are snug and that the entry membranes still grip the cable or conduit cleanly. Any time the box is opened, wipe the sealing surfaces before closing it again so the IP55 protection is not compromised by grit or salt residue.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.