Attwood Marine LightArmor Bi-Color Bow Mount Navigation Light, 12V, 2NM, IP67, Stainless Steel

Overview

The Attwood Marine NV2002SS-7 is a deck-mount bi-color bow navigation light with red and green LEDs, 2 nautical mile visibility, and an IP67 rating. It uses a round 304 stainless steel housing and is rated for boats up to 20 meters (65.6 feet) in length on a 12 VDC system with a 1-amp fuse.

This light sits low on the bow and combines port and starboard output in one housing, which helps when space is tight at the stem or when you want a cleaner deck layout than separate side lights. The LED engine is rated for more than 50,000 hours, stays cool in use, and the telltale indicators on top make it easy to confirm that the light is operating before you leave the dock.

Key features

• Bi-color red and green LED bow light in one round deck-mount housing
• 2 nautical mile visibility for boats up to 20 meters (65.6 feet)
• 304 stainless steel housing with a polycarbonate lens
• IP67-rated construction for spray, rain, and washdowns on deck
• 12 VDC operation with color-indicated wire cores and a 1-amp fuse requirement
• Dual telltale indicators on top of the housing show when the light is on
• Built to the navigation light requirements referenced for EN/ISO 19009:2015, USCG CFR 183.810, ABYC A-16, and 1972 COLREGS installations

Installation and setup

Install it on the bow centerline on a horizontal surface that stays within plus or minus 5 degrees when the boat is floating. The light needs a clear forward view with no rail bases, cleats, anchors, or other deck hardware blocking the port or starboard sectors.

Wiring is straightforward, but it is a 12-volt light only. Use marine-grade crimp connectors with waterproof insulation, protect the connections below deck, and place a 1-amp fuse in the positive feed. The installation pattern calls for a 3/8 inch wire clearance hole and pilot holes for the mounting screws, using the gasket as the template.

Compatibility and fit

This is a sensible match for small to mid-size powerboats and sailboats that need a fixed bi-color bow light rather than separate side lights or a raised combination light. The low deck-mount profile works well on bows where rails, anchors, or trolling motor gear leave limited room for taller hardware.

Because this is a combined bow light, fit depends as much on location as on voltage and visibility range. Check that your bow can take the round base on centerline and that the light will stay unobstructed through normal anchoring, docking, and trailering.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.