B&G WS310 Wired Wind Sensor Pack, NMEA 2000, 35m Mast Cable

Overview

The B&G 000-14843-001 is a WS310 wired wind sensor pack that delivers masthead wind angle and wind speed data to your instruments, supplied with a 35 m mast cable and a wired interface module.

This pack is built for a hard-wired installation on sailing yachts where you want dependable wind data for sailing performance and for wind-driven functions in your instrument or autopilot system. The interface supports connection to an NMEA 2000 network and can also feed a compatible NMEA 0183 input, and it is powered on 12 V DC systems (9 to 16 V DC working range).

Key features

• Wired masthead wind sensor pack with a 35 m mast cable for running from masthead to below-deck electronics
• Interface module for tying the sensor into an NMEA 2000 network (Micro-C) or to a compatible NMEA 0183 input
• 12 V DC system support with a 9 to 16 V DC operating range at the interface
• Interface draws 1 LEN on the NMEA 2000 network
• Interface housing rated IPX7 for better survivability around damp nav stations and occasional spray
• NMEA 0183 wind sentences supported: MWV and R
• Supports longer cable runs up to 80 m for installations on taller rigs

What’s included

• WS310 wired wind sensor
• WS310 wired interface module
• 35 m mast cable

Installation and setup

The sensor mounts at the masthead, so plan the cable route before you go aloft. The 35 m mast cable is intended to run down the mast and into a dry location below deck where the interface can be mounted with good strain relief on the cable.

For NMEA 2000 installs, the interface connects to the backbone with a Micro-C connection. Make sure the network is correctly powered and terminated, and leave service slack so the connector is not carrying cable weight. For NMEA 0183 installs, connect the interface to a compatible NMEA 0183 input that accepts standard wind sentences.

Compatibility and fit

This pack suits sailboats that need a wired wind sensor at the masthead and want wind data available on an NMEA 2000 backbone or via NMEA 0183. The included 35 m cable is a practical fit for many mid-size rigs, while support for longer runs helps when the masthead distance is greater.

The interface has a 300 mm compass-safe distance guideline, so avoid mounting it close to a magnetic compass or other sensitive magnetic instruments.

Use on board

This setup fits coastal cruising boats and club racers that rely on accurate wind angle and wind speed data at the instruments, at the helm, or for wind-aware steering functions. It is also a good match when you prefer a wired run up the mast and want to avoid managing batteries or charging at the masthead.

Maintenance and care

Check the masthead sensor during routine rig inspections for free movement of the cups and vane, and rinse with fresh water after heavy salt exposure. If wind readings become erratic, inspect the cable run for chafe points and confirm the connectors are fully seated and supported so vibration is not working them loose.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.