Jabsco Quiet Flush E2 Fresh Water Marine Toilet, Regular Bowl, 12V, Soft-Close Lid, Touch Panel Control

Overview

The Jabsco 38045-4192RSP is a 12V Quiet Flush E2 freshwater marine toilet with a regular bowl and a soft-close lid. It connects to an onboard fresh water system through a solenoid valve and uses a touch panel with Eco, Normal, and Empty flush modes. Eco mode uses 1.0 litre per flush, which helps on boats where water use and battery draw both matter.

This model is built for heads where space behind the bowl is limited and hose routing is not straightforward. The base can be turned to place the discharge to the left, right, or rear, the discharge pump can be rotated 180 degrees, and the outlet can be set up with a straight or 90 degree discharge port. The regular bowl footprint is about 14.4 in. high, 14.8 in. wide, and 18.9 in. deep, and the recommended fuse size is 25 amps.

Key features

• 12V DC electric toilet for boats using an onboard pressurized fresh water system
• Regular bowl with soft-close lid for a more familiar onboard head layout
• Touch panel with three flush modes: Eco, Normal, and Empty
• Eco flush uses 1.0 litre per cycle
• Base rotates and the discharge pump can be repositioned to help with tight installations
• Straight or 90 degree discharge port for easier hose routing
• Quick-release pump assembly and discharge hose access without tools
• 3/4 in. bowl inlet and 1 in. discharge hose barb, with 1-1/2 in. discharge adaptor option
• Panel and control box rated IP56 for wet head compartments

Installation and fit

This toilet works well in refits where the old hose run does not line up cleanly with the new bowl position. The rotating base and reversible pump position give the installer more freedom to keep pipework to the rear and reduce awkward bends behind the toilet. For freshwater setups, it uses the boat's existing potable water supply rather than a separate raw-water rinse pump.

The control panel connects with a 3 m cable, which gives some flexibility when placing the switch where it can be reached easily from the seat or bulkhead. On the electrical side, this is a 12V DC unit with an operating range of 9.6 to 14.4 VDC and intermittent-duty operation, so it should be wired on a circuit sized for toilet load rather than treated like a low-draw accessory.

Compatibility and service

This model sits in the replacement path for earlier Quiet Flush freshwater units in the 37045 and 37245 range, but hose routing, electrical runs, and available clearance should still be checked before ordering. The freshwater setup also needs adequate flow from the onboard pressure system, especially on boats with long supply runs or multiple fixtures on the same line.

Service access is one of the stronger points here. The quick-release C-clip layout lets the discharge pump assembly come away from the toilet base without tools, which is useful when the head is boxed into a tight compartment or when the system needs cleaning after heavy seasonal use.

Use on board

This is a good match for cruising boats, charter boats, and owners who want freshwater flushing instead of pulling in raw water through the head system. It also suits boats where the toilet is used often enough that quiet operation, low water use in Eco mode, and easier service access matter day to day.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.