Jabsco Quiet Flush E2 Raw Water Marine Toilet, 12V, Regular Bowl, Touch Panel, Soft-Close Lid

Overview

The Jabsco 38245-4192RSP is a 12V Quiet Flush E2 raw water marine toilet with a regular bowl, a soft-close lid, and touch-panel control. It uses a remote rinse pump for sea, river, or lake water, gives you Eco, Normal, and Empty flush modes, and runs on 12V DC with a recommended 25 amp fuse.

This model can be installed on powerboats and sailboats, above or below the waterline, when the rest of the sanitation system is laid out correctly. The base mounts in 90 degree increments, the discharge pump can be rotated 180 degrees, and the discharge port can be set up straight or at 90 degrees, which helps when the head compartment is tight and hose routing needs to go left, right, or aft.

The control panel and control box are IP56-rated, and the Eco cycle uses 1.0 litre of water per flush. That makes this toilet a practical fit for boats where freshwater capacity is limited and where owners want an electric head that is easier to service without pulling apart the whole installation.

Key features

• 12V DC raw water toilet with regular bowl and soft-close lid
• Touch panel with Eco, Normal, and Empty flush modes
• Eco mode uses 1.0 litre per flush, and Normal mode uses 2.0 litres
• IP56-rated touch panel and sealed control box for wet head compartments
• Base rotates in 90 degree increments, and the discharge pump rotates 180 degrees for more flexible hose routing
• 19 mm 3/4 inch inlet connection and 25 mm 1 inch discharge outlet, with a 25 mm to 38 mm adaptor supplied
• Quick-release discharge pump assembly with C-clip access for tool-free service

Compatibility and fit

This version is for boats that use raw water for flushing rather than a pressurized fresh water feed. The toilet bowl inlet takes 19 mm 3/4 inch hose, the standard waste outlet is 25 mm 1 inch, and the supplied adaptor allows a 38 mm 1.5 inch discharge connection where that hose size is already in the boat.

The rinse pump is self-priming up to 1.8 m and uses 19 mm 3/4 inch hose on both inlet and outlet sides, with an inline 40 mesh strainer. For below-waterline installations, vented loops and seacock placement remain part of the system layout, so this toilet is best matched to a properly planned marine sanitation setup with enough room for hose runs and service access.

Installation and setup

The mounting surface needs to be flat, rigid, and strong enough to support both the toilet and the user, with enough clearance around the bowl and under the base for fasteners and later maintenance. The toilet uses three 8 mm stainless mounting bolts or lag bolts.

Service access is one of the stronger points of this model. The discharge pump and hose can be released from the base without tools, which helps on cruising boats, charter boats, and other installations where the toilet is used often and maintenance space is limited.

Use on board

This setup suits boats that want electric flushing without using onboard fresh water for every cycle. It also suits refit projects where the head compartment has awkward hose runs, offset bulkheads, or limited room behind the bowl.

The Empty mode leaves the bowl dry when the boat is moving, which is useful underway or in rougher conditions. For day boats, cruisers, sailboats, and charter vessels, that makes day-to-day use a little cleaner and easier to manage.

What's included

• Quiet Flush E2 electric toilet assembly
• Seat and lid
• Touch pad control panel and control box
• Intake rinse pump kit for the raw water version
• White 19 mm 3/4 inch inlet hose, 6 ft 1.8 m
• 25 mm 1 inch to 38 mm 1.5 inch hose adaptor
• Installation and operating manual
• Datasheet
• Warning label kit

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.