Simrad NMEA 0183-NMEA 2000 Converter Cable, 6 ft, Micro-C to Bare Wire
SKU: APL410249 Part number: 000-15939-001 Barcode: 9420064127658
Ships free. Expected to arrive between and .
Description
Overview
The Simrad 000-15939-001 is a bi-directional NMEA 0183 to NMEA 2000 interface that lets older NMEA 0183 equipment share data with a NMEA 2000 backbone through a Micro-C connection and a bare-wire pigtail.
It runs off the NMEA 2000 network supply and operates from 9 to 18 V DC, drawing 2 LEN (0.48 W, 40 mA at 12 V). The interface is rated IP67 and is specified for operating temperatures from -15 C to +55 C, which suits typical helm and console installs where spray, vibration, and washdowns are part of life on board.
On the NMEA 0183 side, the baud rate is selectable from 4,800 up to 115,200, so you can match common legacy devices as well as higher-speed talkers. Sentence handling can be set from a compatible network display or MFD, which helps when you only want a specific set of data moving between systems.
Key features
- Bi-directional conversion between NMEA 0183 and NMEA 2000 networks.
- NMEA 2000 Micro-C (male) connection with a bare-wire pigtail for the NMEA 0183 side.
- NMEA 2000 powered: 9 to 18 V DC operating range, 2 LEN (0.48 W, 40 mA at 12 V).
- Selectable NMEA 0183 baud rates from 4,800 to 115,200.
- IP67 rating and -15 C to +55 C operating temperature range.
- Sentence configuration available through a compatible network display or MFD.
Installation and setup
On the NMEA 2000 side, this interface installs like a normal network device: add the supplied T-connector into the backbone, then plug the Micro-C connector into the drop port. Make sure your backbone is properly powered and terminated, and leave enough service loop so the cable is not pulling on the connector when the boat is pounding.
The NMEA 0183 pigtail uses a standard color set: black is NMEA 0183 ground, yellow is Rx_A, green is Rx_B, white is Tx_A, brown is Tx_B, with bare drain/shield conductors. Match your device’s talker outputs to the interface receive pair, and the interface transmit pair to your device’s receive inputs, keeping grounds common per your equipment wiring diagrams.
Electrical and system integration
Because it is powered from the NMEA 2000 network, no separate power feed is normally needed beyond a correctly fused and powered backbone. Budget 2 LEN on the bus and confirm you have clean 12 V network power at the backbone under load, especially on smaller boats where voltage drop can show up quickly.
Once on the network, the interface will appear in the device list of a compatible display. Set the correct NMEA 0183 baud rate for the connected equipment and adjust sentence handling so you are only moving the data you actually want between the 0183 side and the NMEA 2000 side.
Use cases on board
This interface is a good match for boats that already have a NMEA 2000 backbone but still rely on NMEA 0183 gear, such as legacy navigation sensors, older instruments, or electronics that exchange position, heading, depth, or wind data over 0183 wiring. It also works the other direction when a NMEA 2000 network needs to feed a NMEA 0183 listener.
What’s included
- NMEA 0183 interface cable with inline converter module and Micro-C connector
- NMEA 2000 T-connector
Specifications
- Accessory Type
- Converter Cable
- Product Color
- Black
- Product Material
- Plastic
Reviews (0)
Shipping and delivery
Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.
Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.
We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.
Learn more.
Returns and refunds
Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.
To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.
Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.
After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.
For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.
Learn more.
Product warranty
Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.
If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.
Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.
Learn more.

