Victron Energy CNN Fuse, For Lynx Shunt VE.Can, 325A, 80V, 10mm

Overview

The Victron Energy CIP140325000 is a 325A, 80V CNN fuse for the Victron Lynx Shunt VE.Can. It is used as the main overcurrent protection point inside a Lynx Shunt based DC distribution system, making it a practical fit for higher-current battery banks on cruising boats, workboats, fishing vessels, and off-grid marine power installations.

This fuse is rated at 325 amps and 80 volts, with a 10 mm terminal size for installation in the Lynx Shunt fuse position. The CNN format is built for stud-mounted high-current DC protection, so it is suited to the battery side of a marine electrical system where fault current needs to be interrupted before it can damage cabling, batteries, or connected equipment.

Key features

• 325A current rating for high-current DC battery and distribution circuits.
• 80V voltage rating supports common 12V, 24V, and 48V DC system architectures when properly specified for the installation.
• CNN fuse format fits the Victron Lynx Shunt VE.Can fuse location.
• 10 mm terminal size matches the Lynx Shunt mounting hardware requirement.
• Useful for protecting battery cables and DC distribution equipment from overcurrent faults in a properly fused marine power system.

Compatibility and fit

This fuse is intended for use with the Victron Lynx Shunt VE.Can. It should be selected as part of a complete DC protection plan that accounts for battery bank voltage, expected continuous current, cable size, cable length, and the interrupt protection required for the system.

For boat installations, the 325A rating is most relevant to larger inverter, charger, bow thruster support, house battery, and DC distribution layouts where current demand is well above small accessory circuit levels. Fuse selection should always match the weakest protected part of the circuit, not only the rating of the connected equipment.

Installation and setup

Mount the fuse only in the correct Lynx Shunt fuse position and keep all DC power isolated before installation. Terminal contact surfaces should be clean, properly seated, and tightened to the torque specified for the Lynx Shunt hardware so the connection does not run hot under sustained load.

Because this component sits in a high-current battery circuit, it should be installed where it stays protected from spray, loose tools, vibration movement, and accidental short circuits. On boats, that usually means inside a secured electrical compartment with proper cable support and covers in place after service.

Use cases on board

This fuse is a good match for vessels using a Victron Lynx Shunt VE.Can as part of a monitored battery and DC distribution system. It suits installations where the owner or installer wants a clean Victron Lynx layout with a defined main fuse protecting the high-current side of the system.

What’s included

• One Victron Energy CNN fuse, 325A/80V, for Lynx Shunt VE.Can

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.