MotorGuide Xi Series Trolling Motor Foot Pedal, Wireless 2.4GHz

Overview

The MotorGuide 8M0092069 is a 2.4 GHz wireless foot pedal for Xi series electric steer trolling motors, including Xi3 and Xi5 models. The heel-toe steering layout lets you turn right with toe-down and left with heel-down, then stop the turn by letting the pedal return to the center detent. Steering range allows you to rotate the motor past 360 degrees in either direction, which is handy when you are lining up on structure or following a contour.

Speed is set with the dial on the pedal, with both momentary run and constant on/off control at the selected speed. The pedal runs on two AA alkaline batteries and syncs to the motor receiver, so it can be placed where your feet naturally land on a casting deck or bow platform without a cable run across the boat.

Key features

• 2.4 GHz wireless foot control for compatible MotorGuide Xi series motors (Xi3 and Xi5)
• Heel-toe steering with a center detent to stop turning without hunting for a switch
• Steering range that can rotate the motor past 360 degrees in either direction
• Speed control dial plus both momentary run and constant propeller on/off at the selected speed
• Anchor button control on motors with GPS installed, and it also functions as the pedal on/off control
• Receiver can sync up to 40 wireless controllers for multi-control setups
• Uses two AA alkaline batteries with a gasketed cover to help keep the battery compartment sealed

Compatibility and fit

This pedal is intended for MotorGuide Xi series motors that support wireless controllers. It is commonly used with Xi3 and Xi5 models and communicates through the motor’s receiver once it is synced, so there is no hardwired foot pedal connection to route through the deck. If your boat runs multiple wireless controls, the receiver can store many devices, which is useful when you want both a foot pedal and other controls on board.

Installation and setup

Syncing is done at power-up. After connecting the trolling motor to its power source, press and hold the propeller and anchor buttons on the pedal within ten seconds, then listen for the multi-tone beep that confirms the receiver learned the pedal. When activating more than one pedal, unplug the motor from power and plug it back in between each device activation.

Battery access is under the cover secured by two screws. Replace with two AA alkaline batteries in the correct polarity and make sure the rubber seal is seated before reinstalling the cover.

Use cases on board

This setup makes sense for anglers who want their trolling motor to respond while they are moving around the bow, working a rod locker, or landing a fish, since the pedal is not tied to a fixed cable location. It is also a good match for boats where keeping the deck clear matters, such as bass boats, multispecies rigs, and open-bow skiffs with a busy casting area.

Safety and compliance

Rotating propellers can cause serious injury or death. Never start or operate the trolling motor out of water.

When activating the trolling motor with the foot pedal, the motor can start at the last selected speed and course settings. Before pressing the pedal, hold on to a seat or handhold and advise passengers to do the same.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.