Lumitec Aurora Flush Mount LED Dome Light, White/Red Light, Dimming, Bezel Switch, IP67, 10-30V, White Housing, 4in

Overview

The Lumitec 101605 is an Aurora flush-mount LED dome light that switches between white and red output with dimming from the built-in bezel control. It runs on 10-30 VDC and is sealed to an IP67 rating, so it can handle damp cabins, spray, and routine washdowns. White mode output is 180 lumens at 5000K, with a rated draw of 345 mA at 12V (210 mA at 24V).

The 4.00 in (10.16 cm) face and 0.73 in (1.84 cm) depth work well where headliner clearance is tight, including berth areas, pilothouses, console interiors, and under hardtops. Red mode is useful when you want light that keeps night vision intact for early departures, dock checks, or running in the dark.

Key features

• Dual-color output (white and red) with dimming built into the bezel control
• 10-30 VDC input for 12V and 24V DC systems
• IP67-rated sealed light for wet environments and exposed mounting spots
• White output: 180 lumens at 5000K
• Power draw: 345 mA at 12V, 210 mA at 24V (4 W rated)
• Flush-mount footprint with 4.00 in (10.16 cm) diameter and 0.73 in (1.84 cm) depth
• Simple 2-wire hookup
• Operating temperature range: -31 to 131 F (-35 to 55 C)

Installation and setup

This light installs as a low-profile flush mount and only needs a 2-wire feed from your boat lighting circuit. Plan for a 1/2 in wiring pass-through and use marine-grade connections with heat-shrink sealing, especially in damp overhead locations.

For outdoor or semi-exposed installs, bedding the fasteners and any penetrations helps keep water out of the core and headliner. The shallow body depth makes it a good fit in hardtops and cabin liners where you do not have much space behind the panel.

Electrical and control notes

Color selection and dimming are handled at the bezel, so the light is typically run from a standard switched supply rather than an external dimmer module. If your boat has existing dome light wiring, this is a straightforward swap as long as the circuit is within the 10-30 VDC range.

Use on board

This is a good match for cruisers and fishing boats that want one fixture to cover normal cabin lighting and a red night mode without adding separate switches. It is commonly used over berths, in heads, under T-tops, in pilothouses, and inside consoles where you want a clean flush look.

Maintenance and care

Rinse salt residue when needed and wipe with mild soap and water. Avoid harsh solvents on the lens and finish, and check wiring connections periodically in high-vibration areas.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.