Lumitec Octane LED Wakeboard Tower/Spreader Light, 1000 lm, White Light 5000K, 10-30V, IP67, For 2-3 in Dia Tubes, 16W

Overview

The Lumitec Octane is a 1,000-lumen LED tower and spreader light that runs on 10-30 VDC and draws 1.3A at 12V (600 mA at 24V). It puts out white light at 5000K, uses 16W, and carries an IP67 water ingress rating for typical on-deck exposure.

It mounts with a bracket so you can aim the beam where you need it on a wakeboard tower, hardtop, or spreader position, then lock the angle in place. This is a good match for boats that want a fixed white work light on either 12V or 24V systems without adding a large electrical load.

Key features

• White light output at 5000K with 1,000 lumens for working areas on deck, in the cockpit, and around the swim platform.
• Wide input range (10-30 VDC) for 12V and 24V systems, with published draw of 1.3A at 12V and 600 mA at 24V.
• IP67 water ingress rating for rain, spray, and routine washdowns.
• Rated 16W, helping it fit into typical lighting circuits without oversized wiring.
• Mounting bracket works on flat surfaces or tubing between 2 in and 3 in diameter.
• Set screw locks the aiming angle after alignment, which helps on boats that see vibration and trailering.
• Billet 6061-T6 aluminum housing for a rigid mount on towers and hardtops.

Variants

This light is offered in multiple housing colors to match tower hardware and the look of the boat.

The variations are based on housing color.

• 101331: Product color Black. A clean match for black powder-coated towers and dark hardtop supports.
• 101330: Product color Silver. Blends well with stainless, polished aluminum, and mixed-metal tower hardware.

What's included

• Light assembly
• Mounting bracket
• Set screw
• Mounting fasteners

Installation and setup

Mount to a flat surface or a 2 in to 3 in diameter tube, then run the power wires through the mounting bracket. Predrilling is recommended for the mounting screws, and a 3/8 in wire exit hole is suggested for the wire pass-through. Once the light is aimed, tighten the set screw to keep the beam pointed where you want it.

Electrical and system integration

Connect to a 10-30 VDC lighting circuit and fuse the circuit appropriately for the load. With a standard SPST on/off switch it operates like a normal deck light, and it can be used with an LED-rated dimmer when the dimmer is suitable for the circuit and load.

On-board use

Common placements are wakeboard towers, T-tops, hardtops, and spreader locations where you want white light for docking, rigging lines, loading gear, or checking the cockpit at night. If you run in saltwater or keep the boat in the sun, the sealed IP67 build helps when the fixture is exposed to spray and weather.

Maintenance and care

Rinse after saltwater use and periodically check the bracket fasteners and set screw for tightness. Keep the lens clear of salt film and grime so the beam stays even and useful.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.