Lumitec Moray Flex Strip Light, RGBW, 2-Wire, 10-16V, IP67

Overview

The Lumitec Moray Flex Strip Light is a Spectrum RGBW flex strip with an internal driver and color controller, so it can run from a simple 2-wire 12V DC feed without an external driver.

It supports white light at 5000K with CRI 80+ along with full-color output. Basic dimming and color functions can be handled at the switch using timed on/off toggles, and it can also be controlled through the Lumitec Poco digital lighting control ecosystem.

The strip is sealed to an IP67 rating and has a 0.65 in by 0.65 in profile. Output and draw scale with length, ranging from about 113 lumens and 4.1 W at 1.5 ft up to 900 lumens and 33 W at 12 ft.

Key features

• Integrated driver and color controller for a 2-wire hookup, no separate driver required
• Rated for 12V DC systems with a 10 to 14 VDC operating range
• Spectrum RGBW output with 5000K white light and CRI 80+
• IP67 sealed housing for wet areas where spray and washdowns are expected
• Timed Toggle Protocol control from a standard on/off switch for dimming, color cycle, and color lock
• PLI-enabled and compatible with Lumitec Poco digital lighting control
• 0.65 in x 0.65 in top-emitting profile for tight mounting locations
• Minimum bend diameter of 4.75 in (120 mm) and the strip must not be cut

Variants

Moray Flex is offered in multiple fixed lengths, and the primary difference across the range is the length of the strip.

Available sizes are 1.5 ft, 3 ft, 4.5 ft, 6 ft, 7.5 ft, 9 ft, 10.5 ft, and 12 ft. Since the strip is sealed and must not be cut, selecting the right length matters for both fit and overall light output.

What’s included

• Moray Flex light strip (selected length)
• Connectors
• Mounting screws

Installation and setup

Lay out the run so the strip can follow the mounting surface without tight turns. Keep bends gentle, maintain at least a 4.75 in (120 mm) bend diameter, and bend only in the intended orientation.

Wire red to +12V DC and black to negative or ground on a protected circuit with an appropriately sized fuse or breaker. When using switch control, the timed toggle functions rely on quick off/on toggles at the power switch.

Compatibility and fit

This strip is for 12V DC boats and requires a +12V supply. The 0.65 in square profile helps it fit behind trim and in narrow channels, including under-gunnel edges, cockpit seating recesses, cabin coves, and locker interiors.

Use on board

It fits well as accent and courtesy lighting where you want clean white for tasks along with color for atmosphere, such as cockpit coamings, hardtop overhangs, cabin toe-kicks, and companionway steps. It is a strong match for boats that need RGBW control without making room for an external driver, and for setups that already use Poco control.

Maintenance and care

Wipe the housing with mild soap and water as needed. Avoid solvents and avoid nicking the jacket, since damage to the sealed body can compromise water resistance.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.