Hella Marine EuroLED 75 Square Spare Trim, Black Plastic

Overview

The Hella Marine 980585201 is a black plastic spare trim bezel for the Slim Line LED square courtesy lamp family. It is the visible rim that finishes the edge around the lens, so you can replace a damaged trim or change the look without touching the wiring.

This trim is used one per lamp and matches the square Slim Line face size (60 mm). It is meant for the recessed-mount square courtesy lights often used for step lighting, companionways, cockpit walkways, and other low-level areas where you want light that stays comfortable at night.

This is the trim bezel only, not the light itself.

Key features

• Black plastic spare rim for the Slim Line LED square courtesy lamp family
• One rim is used per lamp, helpful for repairs and refits where a single trim gets scuffed or cracked
• Plastic that resists UV exposure and impact in typical onboard locations
• Fits onto the lens after the lamp is screw-mounted, so a trim swap does not require rewiring
• Matches the square Slim Line lamp face size (60 mm) used on the recessed-mount square courtesy lights

Compatibility and fit

This trim suits the Slim Line LED square courtesy lights that run on 12V or 24V DC and are sealed to IP67. Changing the rim does not alter the electrical side of the installation, but it is worth keeping the gasket and sealing surfaces undisturbed so the light stays properly sealed.

It is used across the square lamp family offered in white, warm white, blue, and red outputs. As a quick visual check, the square face is 60 mm and the light is typically recessed into a 50 mm cut-out.

It is not intended for round courtesy lights or other Hella Marine light families that use different bezel styles and sizes.

Installation and setup

Isolate power at the switch panel before working around the light. Remove the existing bezel from the lens, then fit this trim onto the lens once the lamp body is mounted.

If the light is being removed and reinstalled at the same time, mount the lamp to a flat surface with its gasket in place. After fitting the bezel, restore power and confirm the rim sits flush with no gaps.

Use cases on board

Handy for keeping a consistent look when one cockpit step light trim gets knocked or sun-faded, or when you are moving to black hardware and want the courtesy lights to match.

A good match for owners and crews who keep small service spares on board for high-traffic areas where trims take the most abuse.

Maintenance and care

Rinse with fresh water and clean with a mild boat soap as needed. Avoid strong solvents that can haze plastic finishes.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.