Attwood Marine Oval Navigation Light Base, For Angled Pole Lights, 2-Pin, 7.5 Degree Angle, Black Housing

Overview

The Attwood Marine 91022-7 is an oval 2-pin base for angled pole lights with locking collars. It mounts in tight spots such as narrow gunwales and deck sections, and it sets the pole at a 7.5 degree angle. The black polymer housing measures 1-11/16 inch wide by 2-5/8 inch high, so it fits where a larger base can be awkward.

This base is built for everyday marine exposure. The socket is covered by soft rubber with a molded-in gasket to help keep moisture and debris out when the pole light is removed, while nickel-plated contacts, multi-crimped connections, and tinned wire leads help the electrical side hold up better around spray, washdowns, and vibration.

Key features

• Oval 2-pin base for angled Attwood pole lights that use a locking collar

• 7.5 degree socket angle suits narrow gunwales and deck mounting areas

• Soft rubber cover with a molded-in gasket helps keep the socket cleaner and drier when the light is stowed

• Nickel-plated contacts with multi-crimp construction help reduce corrosion at the connection point

• Tinned wire leads are better suited to marine wiring runs than bare copper leads

• Compatible with Attwood locking-collar pole light series including 5110, 5310, 5330, 5340, 5530, 5540, and 5091-10-7

Compatibility and fit

This base is for angled plug-in pole lights with Attwood's 2-pin locking-collar connection. It is a good match when you are replacing the same style base or setting up a pole light where deck space is tight. It is not the right choice for straight-pole bases or for other pin layouts, so it is worth checking the pole style and the socket pattern before ordering.

Because the housing is compact, it works well on smaller transoms, cockpit corners, and other spots where a wider base can interfere with lines, covers, or foot traffic. The black finish also keeps the base visually understated on darker trim and hardware.

Installation and setup

The 91022-7 uses wire leads for connection into the boat's navigation light circuit, so installation is straightforward for a replacement or a fresh rig. Support the wiring below the mounting surface and make clean, sealed splices so the connection stays stable as the boat pounds through chop and the pole is removed and reinstalled over time.

This part does not determine system voltage on its own. The electrical load and lamp style come from the pole light used with it, so the important fit points are the angled 2-pin locking-collar connection, the mounting space, and the matching light series.

Use on board

This base makes sense on boats that use removable all-round or navigation pole lights and do not have much room around the mounting spot. It suits owners replacing a worn pole base on a fishing boat, runabout, or small cruiser where the socket needs to stay protected when the light is off the boat.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.