Hella Marine 2010 Series Fold-Down Anchor Light, 20 in Black Pole, 2 NM

Overview

The Hella Marine 995002031 is a 12V all-round white anchor/navigation light on a fold-down pole, built to give 2 nautical mile visibility with full 360 degree coverage. It stands 20 in tall in the raised position and mounts on a base footprint of 2-3/16 in x 2-1/32 in, which helps when you are matching an existing pad or replacing an older light.

The pole adjusts through 180 degrees and locks where you set it, so it can be tilted down for trailering, storage, or low bridges without removing the base. A removable wedge is included to sit the base cleanly on a slightly cambered surface, which is common on transoms, hardtops, and coamings.

This light uses a 12V / 10W SV8.5 festoon bulb and comes pre-wired with 100 mm of marine cable for a quick hookup inside a console, hardtop, or under-deck chase. The housing carries an IPX6 rating for washdowns and heavy spray, and it meets IMO COLREG 72, USCG, and ABYC A-16 requirements for its class.

Key features

• All-round white anchor/navigation light with 2 nautical mile visibility and 360 degree coverage
• For vessels up to 20 m (65 ft) in length
• 20 in fold-down pole in black, with 180 degree adjustment and a locking collar
• Base footprint: 2-3/16 in x 2-1/32 in
• IPX6 rating for spray and washdowns
• 12V / 10W SV8.5 festoon bulb included
• Pre-wired with 100 mm of cable for straightforward connection to a 12V lighting circuit
• Non-magnetic construction and hardware that holds up well in a saltwater environment
• Meets IMO COLREG 72, USCG, and ABYC A-16 requirements

Installation and setup

Mount the base where the lens will have a clear, uninterrupted view around the horizon. On many boats that means the highest practical point on the hardtop, radar arch, or aft deck area, kept clear of antennas, flags, and rod holders that can block the light.

Use bedding compound under the base, seal fasteners properly, and route the cable so it is supported and protected from chafe. The 100 mm leads are meant to be joined inside a dry area using marine-grade, sealed connections, then run to your navigation/anchor light switch on a fused 12V circuit.

Compatibility and fit

This is a pole-mount all-round light commonly used as an anchor light, and it can also serve as the required all-round white navigation light on vessels where regulations allow that configuration. Confirm your existing lighting arrangement and mounting height, and make sure the chosen spot gives true 360 degree visibility once the boat is loaded and trimmed.

Maintenance and care

Rinse the lens and housing with fresh water after saltwater runs and avoid abrasive cleaners that can haze the lens over time. If the light output drops or fails, the SV8.5 12V / 10W festoon bulb is a standard service item and can be replaced as needed after isolating power at the switch or breaker.

What’s included

• All-round anchor/navigation light with 20 in fold-down pole and base
• Removable mounting wedge
• 12V / 10W SV8.5 festoon bulb
• Stainless steel mounting screws

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.