Lumitec GAI2 LED Positionable Light, 10-30V, 6W, IP67, Surface Mount, 5000K Cool White, White Housing, 340 lm

Overview

The Lumitec 111823 is a positionable LED utility light with a heavy duty surface-mount base for general lighting and close-up tasks on a boat. It runs on 10-30 VDC for 12V and 24V systems, uses 6W, and outputs 340 lumens of 5000K white light. The fixture is sealed to IP67 for wet locations and washdowns, and this version has no built-in switch so it can be controlled from a panel switch or upstream dimmer circuit.

The round base measures 2.53 inches across, which helps when you are fitting lighting onto a bulkhead, overhead, or cockpit sidewall. Because the head is aimable, you can point light at a chart table, steps, a berth, or a work area without lighting up the whole cabin.

This is a good match for boaters who want a clean, cool-white work-light look in a compact fixture, especially in spots that see spray, vibration, and frequent use.

Key features

• 10-30 VDC input for 12V and 24V DC systems
• 6W LED output with 340 lumens of 5000K white light
• IP67 sealed for exterior mounting and washdown zones
• Aimable head to direct light where you need it
• Surface-mount base with a 2.53 inch diameter footprint
• No built-in switch for clean installations with remote switching

Installation and setup

Plan the mounting location so the head has room to swivel without hitting trim, doors, or soft goods. If you are installing it outside or in a damp locker, seal the fasteners and the wire pass-through so water cannot migrate into the core or behind panels.

Route wiring with a drip loop and secure it so it cannot chafe from vibration. On open decks and in cockpits, keep the run tucked under coamings or inside conduit where it will not get snagged by gear.

Electrical and system integration

Wire it to a protected 10-30 VDC lighting circuit and control it from an external switch at the helm, cabin panel, or a nearby rocker switch location. If you want brightness control, use a compatible dimmer on the supply side and confirm the dimmer is rated for LED loads.

Use cases on board

Common installs include reading light duties at a berth, task lighting at the helm, cockpit prep lighting, and spot lighting for steps and companionways. The 5000K output reads as a crisp white, which helps when you are sorting lines, checking labels, or doing quick maintenance at night.

Maintenance and care

Rinse salt residue off the exterior when you wash down the boat, especially around the pivot points and base edge. Avoid harsh solvents on the lens and finish, and periodically check that mounting screws stay snug after long runs in chop.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.