Lopolight PRO Series 360° Double Red Navigation Light, 3NM Visibility, 20-32VDC, IP68, Built-In De-Icing

Overview

The Lopolight 300-114G2ST-PRO-I is a 3 nm, 360° red double navigation and signal light with a built-in de-icing function for larger commercial vessels. It runs on 20-32 VDC (24 V systems), is sealed to IP68, and draws about 2.9 W.

The housing measures Ø92.5 mm x 112 mm and uses a hard coat anodized aluminum body with a PMMA lens. It is approved to COLREG72 and EN14744, and it is also listed for IEC 60945 and IACS E10.

This is a good match for operators who need an all-round red light that stays visible in spray and cold weather, including vessels that see winter service where icing can block a lens.

Key features

• 3 nm visibility with a full 360° red sector in a double-light configuration
• Built-in de-icing and a stated operating range of -60°C to 55°C
• 20-32 VDC input for 24 V systems; power draw listed as 2.9 W (about 120 mA at 24 VDC)
• IP68-rated assembly with plug-connector connection for service-friendly removal
• Horizontal mounting on a 400-037 POM base, with side cable exit and an HDPE base plate
• Hard coat anodized aluminum (50 micron) housing with PMMA lens and A4 stainless steel screws
• Compact footprint (Ø92.5 mm x 112 mm) and 1.52 kg weight for mast or superstructure mounting
• Minimum feed wire gauge listed as 1.5 mm² (AWG 18)

What's included

• Navigation light assembly
• 400-037 POM mounting base
• HDPE base plate
• Cable gland for 7-13 mm (9/32" to 1/2") cable diameter

Installation and setup

Plan the mounting location so the light has an unobstructed 360° view and the lens sits level. On larger vessels this is often on a mast platform or a dedicated bracket on the superstructure, clear of antennas, davits, rails, and other structures that can mask the arc.

The unit mounts horizontally to the 400-037 base, and the cable exits to the side. Route the cable so it is supported against vibration, with a drip loop before the deck penetration and enough slack to disconnect the plug connector during service.

Electrical and system integration

Supply is 20-32 VDC, which aligns with 24 VDC shipboard systems. With a listed draw of 2.9 W, circuit loading is modest, but de-icing is meant for cold-weather operation, so the circuit should be wired and protected to your vessel standards.

Use at least 1.5 mm² (AWG 18) feed conductors as a minimum and keep terminations sealed from moisture. If you are tying into a navigation light panel or monitoring system, confirm it supports the light's voltage range and the plug-connector interface.

Maintenance and care

Rinse salt deposits during routine washdowns and inspect the lens and cable gland for loosening. In icing conditions, confirm the lens area stays clear and re-check fasteners on the base after the first few runs.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.