TACO Marine Transom Cross Tie Cleat XL, For 1-7/8 in Rod Holders, 5/8 in Dock Lines, Brushed Aluminum

Overview

The TACO Marine F30-0863BSA-1 is a portable Transom Cross Tie Cleat XL for keeping stern dock lines elevated and clear of outboard motor cowlings during short-term docking. It gives the stern a raised tie-off point when the dock sits lower than the engines, which is a common issue on center consoles, bay boats, and other outboard-powered boats.

This XL cleat uses a brushed aluminum finish with a 15 degree S-shape, 9 in. cleat design. The 5-1/2 in. sleeve fits into standard 1-7/8 in. open-bottom gunwale rod holders, and the latching mechanism holds the cleat in place while still allowing it to be removed and stowed when it is not needed.

The cleat accepts dock lines up to 5/8 in. and can also be used for light onboard tasks such as hanging fenders or chum bags. It is useful for docking and temporary tie-off situations, but it is not intended for permanent docking.

Key features

• Raises stern dock lines to help keep them away from outboard motor cowlings when tying off at the transom.
• Fits standard 1-7/8 in. open-bottom gunwale rod holders with a 5-1/2 in. sleeve.
• 15 degree S-shape, 9 in. cleat gives room to manage dock lines up to 5/8 in.
• Latching mechanism helps hold the cleat in the rod holder while keeping removal and reinstallation straightforward.
• Brushed aluminum finish suits visible cockpit and transom areas without adding permanent hardware.
• Loop hole design supports additional temporary uses such as hanging fenders or chum bags.
• Made in the USA and backed by a 1-year limited warranty.

Installation and fit

This cleat drops into a compatible open-bottom rod holder, so it is a practical option when the boat already has stern or gunwale rod holders in the right location. Before ordering, check that the rod holder is open at the bottom and has a 1-7/8 in. diameter opening that can accept the sleeve.

Because it is removable, it works well for boaters who want a clean deck layout while underway and a more convenient stern tie-off point when they arrive at the dock. It should be stowed when not in use and should not replace a fixed cleat for long-term mooring.

Use on board

The Transom Cross Tie Cleat XL is a good match for outboard boats that regularly dock stern-to or alongside docks where the line angle would otherwise run too low across the engines. It helps keep dock lines organized during arrival, fueling, marina stops, and short dockside stays.

For fishing boats, the removable format is also useful because the cleat can be installed only when needed, leaving the rod holder available for normal use the rest of the time.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.