Hella Marine Apelo Surface Mount Spacer, For Apelo A1/A2, Side Cable Entry

Overview

The Hella Marine 280801001 is a surface-mount spacer for Apelo A1 and Apelo A2 underwater lights that lets you place the lights where they look right while routing the cable to a more practical entry point.

Instead of drilling a cable hole straight through the transom behind the light, the spacer allows side cable entry so the wiring can be routed to an above-water location or anywhere you have better internal access. It also adds a 5° mounting surface that can be rotated in any direction to fine-tune the light aim and help compensate for a transom angle.

Key features

• Compatible with Apelo A1 and Apelo A2 underwater light models
• Surface-mount spacer that supports side cable entry for flexible cable routing
• Helps avoid drilling directly behind the light when the best wiring path is offset
• 5° angled surface can be oriented as needed to tweak beam direction and offset transom angle
• Useful when nearby hardware like trim tabs or an outboard could block part of the light output

Installation and setup

This spacer mounts on a flat surface on the transom. Before drilling, dry-fit the light and spacer together so you can confirm the side cable exit lines up with the cable route inside the boat and the 5° angle is pointing where you want the beam.

On transoms with tight access, plan the cable run first and pick a side exit that keeps the connection away from hard bends and chafe points. Seal any penetrations and support the cable so vibration does not work on the wiring over time.

Compatibility and fit

This part is an accessory for the Apelo A1 and A2 underwater lights and does not change the light’s electrical requirements or control method. It changes the mounting geometry at the transom so spacing, cable routing, and beam direction are easier to dial in.

Use cases on board

This spacer makes sense for refits where the cleanest wiring path is not directly behind the fixture, or for multi-light installs where you want consistent spacing without being forced into awkward cable holes. It is also handy when you need to aim slightly away from an obstruction near the transom.

Maintenance and care

During routine haul-outs, check that the fasteners remain tight and that sealant lines are intact. If you remove a light for service, inspect the side cable path and re-seal as needed before the boat goes back in the water.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.